Genie GTH-636 manual Check Hydraulic OIL Level

Page 54

MAINTENANCE PROCEDURES

DAILY MAINTENANCE

CHECK HYDRAULIC OIL LEVEL

Location: Sight glass (B). Behind the rear panel.

To Check: Move the machine to level ground.

Level the frame.

Completely retract the boom.

Position the forks level.

Lower the boom to the ground.

Oil should be visible 1/2 way in sight glass (B).

NOTE: Refer to page 5-24 of this manual for the proper oil

specifications and capacities.

CHECK TIRE FOR PROPER INFLATION

Location: Wheel ends.

To Check: With the valve stem (C) positioned to the top of the tire, check the tire pressure with the tire cold and a properly functioning air pressure gauge.

Setting: 50 PSI.

DANGER

All tires require a calcium chloride ballast or an optional foam fill to be operated safely. The loss of ballast can affect the machine's stability and cause a rollover hazard, resulting in damage, injury or death.

B

C

5 - 6

Image 54

Contents Operator’s Manual Table of Contents Section Rough Terrain Fork Lift Safety Table of Contents Rough Terrain Fork Lift Safety IntroductionStandards and Symbols StandardsSafety Training and KnowledgeOperators Responsibilities Managements Responsibilities Maintenance and Repair Operation Safety Rough Terrain Fork Lift Safety Rough Terrain Fork Lift Safety Rough Terrain Fork Lift Safety Section General Safety General Safety General Safety General Safety ProceduresWelding Precautions Hand Holds and StepsRefueling Hydraulic Safety Service Tires SafelyFluids Under Pressure Practice Safe Maintenance Boom SafetyUSE Seat Belt Avoid Electrical Power Lines Jump Starting Jump StartingProper Load Chart USE General Safety Section Controls and Instruments Controls and Instruments Controls and Instruments Operators CompartmentJoystick Control Functions Joystick Control Functions Button Pushed Service Brakes Parking BrakeFrame Sway Control Gauges Hydraulic Pump Destroke ButtonSteering TransmissionControls and Instruments Section Operation Operation Operation and Safety Guidelines OperationBefore Starting the Engine Starting the Engine Operation Before Operating the Forklift Operate the frame sway control a momentarily right and left Brake on Pump OFF Sway Control Headlight Heater Lics Operation Transporting a Load Operation Placing a Load Operation Section Maintenance Procedures Maintenance Procedures Maintenance Procedures General Safety PracticesBefore Servicing Fluid Under Pressure Daily Maintenance ScheduledmaintenanceCheck Hydraulic OIL Level Section Material Safety Data Material Safety Data Material Safety Data Material Safety Data Sheets MsdsCalifornia Proposition 65 Warnings California