Operator’s Manual | Second Edition • Fourth Printing |
|
|
|
|
SAFETY RULES
Allow for platform movement, electrical line sway or sag and movement due to strong or gusty winds.
Do not use the machine as a ground for welding.
Do not operate an AC powered machine or a
DC battery charger unless using a
Collision Hazards
Check the work area for overhead obstructions or other possible hazards.
Be aware of crushing hazard when grasping the platform guard rail.
Do not lower the platform unless the area below is clear of personnel and obstructions.
Use common sense and planning to control the movement of the machine on or near inclines.
Stay clear of descending platform.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Be sure all maintenance has been performed as specified in this manual and the Genie IWP Super Series service manual.
Be sure all decals are in place and legible.
Be sure the operator’s, safety and responsibilities manuals are complete, legible and in the storage container located on the mast.
Conduct a thorough
of the machine and test all functions before each work shift.
Do not use the machine as a ground for welding.
Improper Use Hazard
Do not leave the machine unattended unless the key is removed to secure from unauthorized use.
Bodily Injury Hazard
Do not operate the machine with a hydraulic oil or air leak. An air leak or hydraulic leak can penetrate and/or burn skin.
4 | Genie IWP Super Series | Part No.48643 |