Genie 48643 Battery and Charger Safety DC Models Burn Hazards, Explosion Hazards, Lifting Hazard

Page 8

Operator’s Manual

Second Edition • Fourth Printing

 

 

 

 

SAFETY RULES

Battery and Charger Safety - DC Models

Burn Hazards

Batteries contain acid. Always wear protective clothing and eyewear when working with batteries.

Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water.

The battery pack must remain in an upright position.

Explosion Hazards

Batteries emit explosive gas. Keep sparks, flames and lighted tobacco away from batteries.

Charge the battery in a well-ventilated area.

Do not disconnect charger DC output wires from the battery when the charger is on.

Electrocution Hazards

Connect the charger to a grounded AC circuit only.

Do not expose the battery or charger to water and/or rain.

Before each use, inspect for damage. Replace damaged components before operating.

Lifting Hazard

The battery pack weighs 90 lbs / 40.8 kg. Use the appropriate number of people and proper lifting techniques.

6

Genie IWP Super Series

Part No.48643

Image 8
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessTip-over Hazards CSAFall Hazards Electrocution HazardsCollision Hazards Damaged Machine HazardsImproper Use Hazard Bodily Injury HazardDecal Legend Outreach Option Safety Bodily Injury HazardPower Wheel Assist Option Safety Collision Hazards Lifting Hazard Battery and Charger Safety DC Models Burn HazardsExplosion Hazards Controls Ground Controls Platform ControlsPage Pre-operation Inspection FundamentalsPre-operation Inspection Maintenance Check the Battery DC Models Observe and ObeyScheduled Maintenance Check the Hydraulic Oil LevelFunction Tests Function Tests Test Interlock SystemTest Auxiliary Platform Lowering Workplace Inspection Setup Operating InstructionsEmergency Stop Platform Raise & LowerManual Lowering Auxiliary Platform LoweringPower Wheel Assist Option Operating Instructions Outreach Option Operating InstructionsDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Transport Instructions Winching the Machine onto a FlatbedTruckLoading the Machine With a Forklift Loading the Machine With a CraneDecals Decal InspectionOutreach Option Specifications IWP-20S IWP-25SSpecifications Distributed By