Cleveland Range inverter manual FU1-38 Output Voltage Adjustment, FU1-39 Energy Save Level

Page 51

Chapter 4 - Parameter Description [FU1]

These functions are available only when ‘User V/F’ is selected in FU1-29 [V/F Pattern]. Users can make the custom V/F pattern by setting four points between FU1-22 [Starting Frequency] and FU1-21 [Base Frequency].

Output Voltage

100%

 

 

FU1-37

 

 

FU1-35

 

 

FU1-33

 

 

FU1-31

 

Output

 

 

FU1-30

FU1-36

Frequency

 

FU1-32

FU1-34

Base Freq.

 

[User V/F]

 

☞Note: When the ‘User V/F’ is selected, the torque boost of FU1-26 through FU1-28 is ignored.

FU1-38: Output Voltage Adjustment

This function is used to adjust the output voltage of the inverter. This is useful when using a motor that has a lower rated voltage than the main input voltage. When this is set at 100%, inverter outputs its rated voltage.

Output Voltage

100%

When set at 50%

50%

Output

Frequency

FU1-21 [Base Freq.]

☞Note: The inverter output voltage does not exceed the main input voltage, even though FU1-38 is set at 110%.

FU1-39: Energy Save Level

This function is used to reduce the output voltage in applications that do not require high torque and current at its steady speed. The inverter reduces its output voltage after accelerating to the reference frequency (steady speed). This function may cause over-current trip due to the lack of output torque in a fluctuating load.

This function does not work with 0% set point value.

Output Voltage

100%

80%

Output

Frequency

Reference Frequency

(Steady Speed)

[When Energy Save Level is set at 20%]

☞Note: This function is not recommended for a large load or for an application that need frequent acceleration and deceleration.

45

Page 50 Page 52
Image 51
Page 50 Page 52
Contents 4 HP Installation, Operation Maintenance InstructionOtherwise, electric shock could occur Safety InstructionsOtherwise, fire or accident could occur Otherwise, you may get an electric shockOtherwise, fire could occur Otherwise, it could result in a secondary accident and fireOperating Precautions Page Page Contents 106 100104 105Motor Rating1 Output Capacity2 kVA User Selection Guide Actionmaster Specifications230V Class 0.5~5.4HP 460V Class 0.5~ 5.4HPControl Control MethodEnvironmental Conditions InstallationInspection 008Installation Other Precautions130 118 128 117.5 152.9 DimensionsInverter 100 128 117.5 130.9SV037ACtionMaster 150 138 128 117.5 155.0 Mccb Basic WiringWiring Power Terminals Precautions on Wiring Power TerminalsGrounding Warning Wires and Terminal Lugs Screw Ring Terminals Wire6 Inverter Torque5 Mm2Motor should be connected to the U, V, and W Terminals Control Terminals 30A 30C 30BKgf·cm/lb-in Wiring Control Terminals Precautions on Wiring Inside InverterControl Circuit Terminal Description Keypad Wiring the KeypadKeypad Connector Pin Configuration Inverter Side Pin NoRUN Key Keypad and Parameter Group SettingOperation SegmentOperation Parameter Setting and ChangeProcedures Setting the DRV Group DataTrip Current Adjusting Function and I/O Group DataExample Changing the F5 data to FrequencyGroup Name Description Parameter GroupMoving Through DRV Group Codes Moving Through I/O Group Codes Moving Through Function Group CodesOperation Operation From Keypad and Control TerminalOperation From Control Terminal Operation From Keypad Drive Group DRV Parameter ListParameter List Function Group 1 FU150 / 60 Hz FU1-37 FU1-52FU1-53 Function Group 2 FU2 FU2-36 FU2-3214FU2-33 FU2-3415FU2-89 FU2-83FU2-85 FU2-8850 /60 Hz Input/Output Group I/OYes Acceleration Time To 999.9 sec Yes For Step Frequency Deceleration Time To 999.9 secYes For Step Frequency Acceleration Time To 999.9 sec Yes Deceleration Time To 999.9 secYes Reference Free Run Acceleration Time To 999.9 secYes FM Frequency Meter Output Current Selection Voltage StallBit Yes Modbus-RTUDRV-01 Acceleration Time DRV-02 Deceleration Time Related Functions DRV-04 Freq Mode FU1-20 Max FreqParameter Description DRV-00 Output FrequencySelect the source of frequency setting Parameter Description DRV DRV-03 Drive Mode Run/stop MethodDRV-04 Frequency Mode Frequency Setting Method Select the source of Run/Stop commandDRV-09 Motor Speed Parameter Description DRVDRV-05 ~ DRV-07 Step Frequency 1 ~ DRV-08 Output CurrentDRV-11 User Display Selection DRV-12 Fault DisplayFault Contents DRV-10 DC Link VoltagePage FU1-03 Run Prevention Function 1 Group FU1Parameter Description FU1 FU1-00 Jump to Desired Code #Selects the stopping method for the inverter FU1-07 Stop ModeStop Mode ‘Free-run’ Output Frequency FU1-22 Time Output Voltage Freq. limit ‘Yes’ FU1-30 ~ FU1-37 User V/F Frequency and Voltage Parameter Description FU1 FU1-29 Volts/Hz PatternFU1-39 Energy Save Level FU1-38 Output Voltage AdjustmentMotor i2t Characteristic Curve FU1-54 Overload Warning Level FU1-55 Overload Warning Time St bit FU1-59 Stall Prevention Mode SelectionThis code is used to exit a group. Press Func key to exit Parameter Description FU1 FU1-99 Return CodeFU2-07 Dwell Frequency FU2-08 Dwell Time Function 2 Group FU2Parameter Description FU2 FU2-00 Jump to Desired Code #FU2-10 ~ FU2-16 Frequency Jump FU2-19 Input/Output Phase Loss Protection Bit SetSetting Range FU2-20 Power on Start SelectionFU2-21 Restart After Fault Reset FU2-19 Phase Loss Protection SelectFU2-22 Speed Search Select Motor Speed Time Output Frequency Output Voltage FU2-39 Carrier Frequency Parameter Description FU2 FU2-40 Control Method Selection This is to select the control method of inverterOutput frequency = Reference freq. + Delta freq Delta freq FU2-70 Reference Frequency for Accel/DecelFU2-74 Gain for Motor Speed Display FU2-72 Power On DisplayParameter Description FU2 FU2-71 Accel/Decel Time Scale FU2-73 User Display SelectionDisplays the software version FU2-76 Duty of DB Dynamic Braking ResistorFU2-79 Software Version FU2-81 ~ FU2-90 2nd Motor Related FunctionsFU2-99 Return Code FU2-91 Parameter Read FU2-92 Parameter WriteFU2-93 Parameter Initialize FU2-94 Parameter Write ProtectionParameter Description FU2 00 Jump to Desired Code # 01 ~ I/O-05 Analog Voltage Input V1 Signal Adjustment06 ~ I/O-10 Analog Current Input I Signal Adjustment Parameter Description I/OFollowing table shows the selection in I/O-48 11 Criteria for Analog Input Signal LossStep Parameter Speed-H Speed-M Speed-L Speed-L, Speed-M, Speed-HTime DC-Brake2nd Function Accel/Decel ParameterExt Trip-A WireV1-Ext Up, DownAnalog Hold 15 Terminal Input Status 16 Terminal Output Status20 Jog Frequency 21 ~ I/O-24 Step Frequency 4, 5, 640 FM Frequency Meter Output 41 FM Adjustment 25 ~ I/O-38 1st ~ 7th Accel/Decel TimeMulti-Accel/Decel Time Operation 44 Multi-function Output define MO-MG 42 FDT Frequency Detection Level 43 FDT BandwidthFDT-4 FDT-1FDT-2 FDT-3Stall IOL46 Inverter Number 47 Baud Rate 45 Fault Output Relay 30A, 30B, 30C99 Return Code 7-Segment Keypad 50 Communication Protocol SelectionSpecifications MODBUS-RTU CommunicationIntroduction System configuration InstallationItems Specifications Connecting the communication lineException Code Name OperatingCommunication Protocol Modbus-RTU Function Code NameNormal Response Acknowledge Response Basic Format Command Message RequestError Response Negative Acknowledge Response Communication Protocol CMC-BUS AsciiDetail Communication Protocol Acknowledge ResponseNegative Acknowledge Response Request for Registration of ‘n’ numbers of Address Request for WriteError Code Common Parameter Description Unit Read/Write Data value HEX Parameter Code ListParameter Description Read/Write Data value HEXValue Description Default Max. value Min. value Unit SS I-Gain Retry delay630A 180Group Parameter Description Default Max. value Min value UnitParameter Description Default Max. value Min value Unit Refer to this chapter when a trouble is occurred TroubleshootingMODBUS-RTU Communication Ascii Code List Character HexSpace Troubleshooting & Maintenance Fault DisplayDisplay Protective Description Troubleshooting & Maintenance Fault Inverter Fault Reset Protective Cause Remedy Fault RemedyCondition Check Point Module How to Check Power ComponentsElements Test Polarity Measured Value ShortPeriodical Inspection MaintenancePrecautions Routine InspectionDaily and Periodic Inspection Items Period InspectionInspection Method Criterion Measuring Instrument Fan Troubleshooting & Maintenance Options Braking Resistor400V Class Model Number 004-4 008-4 015-4 022-4 037-4 DB Resistor2 Phase230V, or Phase 230/460V 50/60Hz OptionsUnit mm DIN Rail Base103 Use Related Parameter Code Appendix a Functions Based on the USEInverter Appendix B- Peripheral DevicesCD 73/23/EEC and CD 89/336/EEC Declaration of ConformityEN 55022 Safety of information technology equipmentCharacteristics of information technology equipment EN 50178Essential Requirements for CE Compliance EMC Installation Guide109 Footprint Filters RFI Filters Footprint Standard for ACtionMaster SeriesRevision Date Remarks Revision History112 Cleveland Motion Controls

inverter specifications

The Cleveland Range inverter is a state-of-the-art piece of kitchen equipment designed to elevate cooking efficiency and precision in commercial kitchens. This versatile appliance is particularly well-suited for establishments such as restaurants, cafeterias, and catering operations, where high-performance and reliability are critical to success.

One of the standout features of the Cleveland Range inverter is its innovative inverter technology. Unlike traditional cooking equipment that utilizes standard heating elements, the inverter system allows for continuous, variable power control. This means that cooks can seamlessly adjust the cooking temperature, offering unparalleled control over the cooking process. The result is more consistent cooking outcomes and a significant reduction in food preparation time, ensuring that dishes are cooked just right every time.

Another characteristic that sets the Cleveland Range inverter apart is its energy efficiency. The inverter technology not only enhances cooking precision but also utilizes energy more effectively, leading to reduced power consumption. This is particularly beneficial for commercial kitchens where energy costs can quickly add up. By minimizing energy waste, the Cleveland Range inverter contributes to a more sustainable kitchen operation.

Safety is also a prime focus of the Cleveland Range inverter. With built-in safety features such as automatic shut-off functions, the appliance ensures that accidental overheating or overcooking is avoided, safeguarding both the kitchen staff and the food being prepared. Additionally, the design of the inverter is user-friendly, making it accessible for cooks at all experience levels.

Durability and ease of maintenance are further characteristics of the Cleveland Range inverter. Built with high-quality materials and a robust construction, it is designed to withstand the rigors of a busy kitchen environment. The straightforward design allows for easy cleaning and maintenance, ensuring that the inverter remains in top working condition over its lifespan.

In conclusion, the Cleveland Range inverter stands out in the commercial kitchen landscape due to its innovative inverter technology, energy efficiency, safety features, and durability. It is an excellent investment for any culinary operation looking to enhance its cooking capabilities while maintaining high standards of food quality and safety. This appliance not only meets the demands of modern kitchens but also sets a benchmark for others in the industry.
Top Page Image Contents