Generator Location, Fuel Factors | Briggs & Stratton 190839GS

Briggs & Stratton Power Products Home Generator System

Owners Manual

NOTE: In some areas you may need to acquire electrical permits for installing the Home Generator System, building permits for installing gas lines, and permits for noise allowances.Your installer should check your local codes AND obtain the permits before installing the system.

Generator Location

The actual physical location of your backup generator has a direct affect on:

1.The amount of plumbing required to fuel your generator.

Fuel Factors

An important consideration affecting the entire installation is the type of fuel used by your Home Generator System. The system was factory tested and adjusted using natural gas as a fuel. Liquid propane (LP) may also be used as a fuel (see the Installation Manual).

Although there are specific factors that are inherent to each of these fuels, your location and the duration of possible utility interruptions should guide your selection of fuel type. For urban installations, Natural Gas (if available) should be your fuel of choice. For remote installations, a Liquefied Petroleum (LP) tank might better meet your needs.

For proper engine function, the following fuel guidelines are recommended:

•Use clean, dry fuel, free of moisture or any particulate material. Using fuels outside the following recommended values may cause performance problems.

In engines set up to run on propane (LP) gas, commercial grade HD5 propane with a minimum fuel energy of 2500 BTUs/ft3 with maximum propylene content of 5% and butane and heavier gas content of 2.5% and minimum propane content of 90%.

CAUTION! This equipment is equipped with an automatic safety gas “fuel shut-off” valve. Do Not operate the equipment if the “fuel shut-off” valve is missing or inoperative.

Power Decrease at High Altitude or High Temperature

Air density is less at high altitudes, resulting in less available engine power. Specifically, engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F (5.6°C) above 77°F (25°C). Make sure you and your installer consider these factors when determining total generator load.

2.The amount of wiring required to control and connect your generator.

NOTE: Specific location guidelines are discussed in the Installation Manual. Acquaint yourself with that information and confer with your installer. Be sure to ask how your site might affect installation costs and compliance with local codes and standards.

Generator Clearances

The generator enclosure must be a minimum of 3 ft.

(92 cm) from combustible material (NFPA 37). Leave at least 3 ft. (92 cm) all around the enclosure for access to the inside of the enclosure (NEC Art. 110-26a,Art. 110-26b).

The unit’s exhaust port must be at least 5 ft. (152 cm) from any building opening (window, door, vent etc.), and the exhaust must not be able to accumulate in any occupied area (Figure 1).

Figure 1 — Home Generator System Clearances

Exhaust
Port	Exhaust port must be
	Exhaust port must be
	5 ft (152 cm) minimum
	distance from building
	openings

190839GS specifications

Briggs & Stratton 190839GS is a versatile and powerful generator that caters to the needs of homeowners, contractors, and outdoor enthusiasts alike. Known for its reliability and performance, this generator is designed to provide a steady power supply during emergencies or when additional electricity is needed on job sites.

One of the standout features of the Briggs & Stratton 190839GS is its robust 8500 running watts and 10500 starting watts. This impressive wattage allows it to power several appliances, tools, and electronics simultaneously, making it an ideal choice for both residential and commercial applications. This makes it particularly useful during power outages, ensuring that essential devices like refrigerators, lights, and medical equipment continue to operate smoothly.

The generator is equipped with a powerful 420cc OHV engine that is engineered for durability and longevity. Its overhead valve engine design reduces emissions and enhances fuel efficiency while providing excellent performance. The engine's design also contributes to quieter operation, which is a significant advantage when using it in residential areas or during outdoor activities.

Mobility is another key characteristic of the Briggs & Stratton 190839GS. It comes with a rugged wheel kit and a collapsible handle, allowing for easy transportation and setup wherever power is needed. This portable design is perfect for taking to job sites, camping trips, or even tailgating events, ensuring that you have reliable power access whenever and wherever you require it.

The generator features a user-friendly control panel with multiple outlets, including 120V and 240V options, accommodating various devices and tools. The inclusion of a digital wattage display provides real-time monitoring of power consumption, enabling users to manage their load efficiently.

Safety is paramount, and the Briggs & Stratton 190839GS incorporates several safety features, including low oil shutdown, which prevents engine damage by automatically turning off the generator when oil levels are too low. Additionally, the generator's sturdy construction and weather-resistant design add to its longevity and ensure that it can withstand the elements.

Overall, the Briggs & Stratton 190839GS generator combines power, efficiency, portability, and durability, making it an exceptional choice for anyone in need of a reliable backup power source or portable electric supply. Whether for emergency use or recreational activities, this generator stands out in its category for delivering performance and peace of mind.