Baldor PC1700RI Section General Information, Limited Warranty, Parts, Generator Series Labor

Page 11

Section 2

General Information

Thank you for purchasing your Baldor Generator Set. This manual contains information you need to safely and efficiently install and operate your generator set. During the preparation of this manual every effort was made to ensure the accuracy of its contents. This manual describes only very basic engine information. A separate owner’s manual for the engine is supplied with this unit for your use. Please refer to the engine manual for information relative to engine operation, maintenance, recommendations and additional safety warnings.

Copyright Baldor E 2004. All rights reserved.

This manual is copyrighted and all rights are reserved. This document may not, in whole or in part, be copied or reproduced in any form without the prior written consent of Baldor Electric Company, Inc.

Baldor Generators have earned the reputation of being high quality and dependable. We take pride in this fact and continue to keep our quality standards high on our list of priorities. We are also constantly researching new technological ideas to determine if they could be used to make our generator sets even better.

Baldor makes no representations or warranties with respect to the contents hereof and specifically disclaims any implied warranties of fitness for any particular purpose. The information in this document is subject to change without notice. Baldor assumes no responsibility for any errors that may appear in this document.

Limited Warranty

Baldor Generators will replace or repair free of charge any part or parts of the generator of their manufacture that are defective in workmanship and materials for a period of time as set forth in the Warranty Period chart below. All Baldor products requiring warranty service shall be transported or shipped freight pre--paid, at the risk of the party requiring warranty service, to a Baldor Generator repair facility, or to Baldor Generators’ Customer Service Department. Written notification of the alleged defect in addition to a description of the manner in which the Baldor generator is used, and the name, address and telephone number of the party requiring warranty service must be included. Baldor is not responsible for removal and shipment of the Baldor product to the service center or for the reinstallation of the Baldor product upon its return to the party requiring warranty service. Problems with Baldor products can be due to improper maintenance, faulty installation, non--Baldor additions or modifications, or other problems not due to defects in Baldor workmanship or materials. If a Baldor Generator repair facility determines that the problem with a Baldor product is not due to defects in Baldor workmanship or materials, then the party requesting warranty service will be responsible for the cost of any necessary repairs. EXCEPT FOR THE EXPRESSED WARRANTY SET FORTH ABOVE, BALDOR GENERATORS DISCLAIMS ALL OTHER EXPRESSED AND IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY. NO OTHER WARRANTY, EXPRESSED OR IMPLIED, WHETHER OR NOT SIMILAR IN NATURE TO ANY OTHER WARRANTY PROVIDED HEREIN, SHALL EXIST WITH RESPECT TO THE GOODS SOLD UNDER THE PROVISIONS OF THESE TERMS AND CONDITIONS. ALL OTHER SUCH WARRANTIES ARE HEREBY EXPRESSLY WAIVED BY THE BUYER. UNDER NO CIRCUMSTANCES SHALL BALDOR GENERATORS BE LIABLE OR RESPONSIBLE IN ANY MANNER WHATSOEVER FOR ANY INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR ANTICIPATED PROFITS RESULTING FROM THE DEFECT, REMOVAL, REINSTALLATION, SHIPMENT OR OTHERWISE. This is the sole warranty of Baldor Generators and no other affirmations or promises made by Baldor Generators shall be deemed to create an expressed or implied warranty. Baldor Generators has not authorized anyone to make any representations or warranties other than the warranty contained herein.

Warranty Period

 

 

 

 

Parts

Generator Series

Labor*

 

 

3 Years

Portable Products (Premier, Powerchief,

1 Year

DG Series, K Series)

 

 

 

 

3 Years or 3,000 Hours

Towable Products (TS)

1 Year or 3,000 Hours

 

Whichever comes first

Whichever comes first

 

 

3 Years or 3,000 Hours Whichever comes first

POW’R LITE Light Towers

1 Year or 3,000 Hours

 

Whichever comes first

Excluded from any warranty coverage regardless of

 

 

time period: Light Fixture, Lamps and Ballasts

 

 

3 Years or 1,000 Hours

3600 RPM Standby Systems

1 Year or 1,000 Hours

(Some AE Models)

Whichever comes first

Whichever comes first

 

 

3 Years or 3,000 Hours

1800 RPM Standby Systems

1 Year or 3,000 Hours

(Some AE Models, DLC, GLC)

Whichever comes first

Whichever comes first

 

 

2 Years or 1,000 Hours

Industrial Standby Systems

1 Year or 1,000 Hours

 

Whichever comes first

Whichever comes first

 

 

1 Year or 1,000 Hours

Industrial Prime Power Systems

1 Year or 1,000 Hours

 

Whichever comes first

Whichever comes first

 

 

1 Year or 1,000 Hours

International

1 Year or 1,000 Hours

 

Whichever comes first

Whichever comes first

*For products covered under labor coverage, travel expenses will be allowed up to 7 hours straight labor or 300 miles, whichever occurs first and only applies to permanently wired and mounted products (AE, DLC, GLC, IDLC).

No warranty registration card is necessary to obtain warranty on Baldor Generators.

You must save the purchase receipt. Proof of purchase, date, serial number and model number will be required for all portable and Towable products to qualify for any warranty consideration.

For all other products, a start--up inspection form/warranty registration must be completed in its entirety and submitted to Baldor Generators within 30 days of start--up to qualify for any warranty consideration.

MN2411

General Information 2-1

Image 11
Contents PC1100R/PC1700RI Portable Generator California Proposition 65 Warning Table of Contents Ii Table of Contents MN2411 Read This Manual Thoroughly Section Product Safety InformationOperation SymbolsOperation Warning Statements Burn Installation Maintenance Product Safety Information MN2411 Generator Series Labor Limited WarrantySection General Information PartsGeneral Information MN2411 Storage Section Receiving & InstallationPhysical Location Frame Ground Connection Engine Oil Frame Ground ConnectionUse of Electric Motor Loads Section Operation DC Output Operator Control Panel ~ AC OutputAC Circuit Breaker DC Circuit BreakerChoke Engine Switch StopOperator Control Panel DC Circuit Breaker RunOperation MN2411 SE or higher grade SAE 10W−30 or SAE 10W−40 Section Troubleshooting and MaintenanceCheck Air Cleaner Left side cover Check Fuel Level Check Oil LevelPeriodic Maintenance Schedule Clean/Adjust Spark Plug Right side coverClean Spark Arrester CleaningTroubleshooting Guide Problems and SolutionsEngine Oil SE or higher grade SAE 10W−30 or SAE 10W−40 ServiceBaldor District Offices California Proposition 65 Warning

PC1700RI, PC1100R specifications

The Baldor PC1100R and PC1700RI are advanced servo motors that stand out in the competitive landscape of industrial automation. These motors are engineered to deliver exceptional performance characterized by high efficiency, reliability, and precision, making them ideal for a variety of applications ranging from robotics to CNC machinery.

The Baldor PC1100R model features a compact design that offers ease of integration into existing systems. With a power rating of 1.1 kW, it delivers robust torque performance while maintaining energy efficiency. This servo motor is equipped with high-resolution encoders that provide precise feedback for accurate position and speed control. The PC1100R also incorporates advanced thermal management technologies to ensure optimal operating temperatures, reducing the risk of overheating and prolonging the motor's lifespan.

On the other hand, the PC1700RI model offers increased power capacity, rated at 1.7 kW. This motor caters to more demanding applications, providing higher torque outputs without compromising on speed and responsiveness. The PC1700RI is designed with a modular architecture, allowing for versatile configurations that can be tailored to specific project needs. Both motors utilize integrated digital controls that enable seamless communication with various automation systems, facilitating smooth operation and enhanced flexibility.

In terms of construction, both the PC1100R and PC1700RI feature durable housing designed to withstand harsh industrial environments. They possess an IP65 rating, making them resistant to dust and water, which is essential for machinery operating in challenging conditions. Additionally, these motors are designed with low vibration and noise levels, contributing to a more comfortable working environment.

Another notable characteristic of the Baldor PC series is the ability to support a variety of feedback devices, including incremental and absolute encoders. This flexibility ensures compatibility with diverse applications and setups. Both models also come with comprehensive support and documentation from Baldor, ensuring users can efficiently implement and maintain their systems.

In summary, the Baldor PC1100R and PC1700RI servo motors exemplify top-tier engineering in the realm of industrial motors. Their features, including compact designs, high efficiency, advanced feedback systems, and robust construction, make them ideal for tackling the demands of modern manufacturing and automation processes. With their reliability and performance, these motors are poised to play a critical role in enhancing productivity across various industries.