Service

Service for your generator can be obtained from Baldor Generators. Please have the following

information available prior to contacting the factory:

The model number and serial number of the generator set.

A complete and accurate description of the problem.

Parts

Parts for your generator can be obtained from Baldor Generators. Please have the following

information available prior to contacting the factory:

The model number and serial number of the generator set.

A complete and accurate description of the part (part number if known).

Engine Oil

(SE or higher grade) SAE 10W−30 or SAE 10W−40

Use class SE (API classification) or better grade oil. SAE 10W−30 or SAE 10W−40 is

recommended for general use. For single viscosity oil use at a specific temperature, refer to the

following chart.

10W

Single Grade

20W

30W

40W

Multigrade

10W 30

10W 40

Ambient

−20

−10

40 °C

Temperature

104 °F

Storage

If you will not be using the generator set for a significant amount of time (3 months or longer) you

should store the generator to prevent any problems that could arise from sitting idle. Please

follow this procedure prior to storing the unit. This will help to ensure that the generator will start and provide good service when it is removed from storage.

1.Remove fuel filler cap.

2.Use a siphon pump to remove all fuel from fuel tank.

3.Install fuel filler cap.

4.Start the generator set and allow it to run out of fuel.

5.Place the Engine Switch in “Stop” position. This closes the fuel valve.

6.Drain the used oil from the engine’s crankcase and refill it with clean oil.

7.Remove the spark plug and pour 1 oz. of clean engine oil into the cylinder. Put a rag over the spark plug port and turn the engine over approximately 5 times to distribute the oil in the cylinder.

8.Install the spark plug but do not connect the plug wire. This will help prevent accidental or unauthorized starting.

9.Provide maintenance to the engine and generator set as described in this section.

10.Inspect bolts and nuts for tightness. Vibration can cause nuts or bolts to loosen.

11.Inspect the recoil starting rope for any damage and replace it if necessary.

12.Cover any bare metal spots with paint or another type of rust preventative.

WARNING: Never store an engine with fuel in its tank indoors or in an enclosed, poorly ventilated area where gasoline fumes could reach an ignition source and cause an explosion.

5-4 Troubleshooting and Maintenance

MN2411

PC1700RI, PC1100R specifications

The Baldor PC1100R and PC1700RI are advanced servo motors that stand out in the competitive landscape of industrial automation. These motors are engineered to deliver exceptional performance characterized by high efficiency, reliability, and precision, making them ideal for a variety of applications ranging from robotics to CNC machinery.

The Baldor PC1100R model features a compact design that offers ease of integration into existing systems. With a power rating of 1.1 kW, it delivers robust torque performance while maintaining energy efficiency. This servo motor is equipped with high-resolution encoders that provide precise feedback for accurate position and speed control. The PC1100R also incorporates advanced thermal management technologies to ensure optimal operating temperatures, reducing the risk of overheating and prolonging the motor's lifespan.

On the other hand, the PC1700RI model offers increased power capacity, rated at 1.7 kW. This motor caters to more demanding applications, providing higher torque outputs without compromising on speed and responsiveness. The PC1700RI is designed with a modular architecture, allowing for versatile configurations that can be tailored to specific project needs. Both motors utilize integrated digital controls that enable seamless communication with various automation systems, facilitating smooth operation and enhanced flexibility.

In terms of construction, both the PC1100R and PC1700RI feature durable housing designed to withstand harsh industrial environments. They possess an IP65 rating, making them resistant to dust and water, which is essential for machinery operating in challenging conditions. Additionally, these motors are designed with low vibration and noise levels, contributing to a more comfortable working environment.

Another notable characteristic of the Baldor PC series is the ability to support a variety of feedback devices, including incremental and absolute encoders. This flexibility ensures compatibility with diverse applications and setups. Both models also come with comprehensive support and documentation from Baldor, ensuring users can efficiently implement and maintain their systems.

In summary, the Baldor PC1100R and PC1700RI servo motors exemplify top-tier engineering in the realm of industrial motors. Their features, including compact designs, high efficiency, advanced feedback systems, and robust construction, make them ideal for tackling the demands of modern manufacturing and automation processes. With their reliability and performance, these motors are poised to play a critical role in enhancing productivity across various industries.