Chicago Electric 94678 manual Inspection, Maintenance, and Cleaning, See maintenance chart on next

Page 13

Inspection, Maintenance, and Cleaning

(See maintenance chart on next page.)

1.WARNING! Make sure the Power Switch of the generator is in its “OFF” posi- tion, that the engine has cooled, and that all loads are unplugged from the electrical outlets before performing any inspection, maintenance, or cleaning procedures.

2.BEFORE EACH USE, inspect the general condition of the generator. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use. Do not use damaged equipment.

3.To clean the air filter: While wearing a NIOSH-Approved dust mask/respi- rator, remove the Air Filter Cover (67) and remove the Foam Filter (69) underneath. If it is ragged or has holes, it will need to be replaced. Rinse the filter out by hand with mild soap and water. Allow it to dry thoroughly before replacing it and reas- sembling the Air Filter Cover (67).

4.TO REMOVE THE SPARK PLUG:

WARNING! To access the spark plug, the Fuel Tank (8a) must be removed. Carefully make sure that the engine is thoroughly cool, that no ignition sources (including lit cigarettes) are nearby, that rags for cleaning up spills and a class ABC fire extinguisher is nearby, and that you have a suitable place to temporarily put the gas tank during work.

a.First, make sure that the Fuel Valves (9a, 81) are both turned to their OFF posi- tions. Secure the Fuel Valve (9a) under the Fuel Tank closed using a string or cable tie if possible.

b.Have a rag ready to promptly clean up the small amount of fuel that will spill and disconnect the fuel line from the Fuel Valve (9a) under the Fuel Tank (8a). Use a small cap to cover the end of the fuel valve to prevent debris from entering.

c.Remove the four Bolts (4a) and other hardware from the corners of the Fuel Tank (8a). Make sure to note the order of the hardware that secures the Fuel Tank to the Frame – it is important that the fuel tank is reinstalled in the same fashion.

d.Gently remove the Fuel Tank and set it aside without tipping it, being careful not to damage the Fuel Valve under the Tank.

e.Now you have access to remove the Spark Plug (44) without difficulty. Care- fully check that the spark plug and wire are both in good condition and securely attached before reassembly.

f.Reassembly is the reverse of the earlier steps. Take note that the Fuel Tank must be reinstalled with the Fuel Gauge in the same orientation as originally (see illustrations on page 9). The fuel tank should fit in place without contacting any engine or alternator components.

SKU 94678

For technical questions, please call 1-800-444-3353.

Page 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents For technical questions or replacement parts, please call HorsepowerUnpacking ContentsSave This Manual SpecificationsSKU 94678 For technical questions, please call Electrical Safety General Safety RulesPersonal Safety Work AreaEquipment Use And Care ServiceSpecific Safety Rules Fire and Explosion Precautions Installation PrecautionsKeep the Generator and surrounding area clean at all times Electrical Precautions Mechanical PrecautionsGeneral Location Installation InstructionsGrounding the Generator Operation Instructions Generator Control IllustrationsPre-start Checks To Power 110/120 Volt AC Tools and Equipment To Charge 12 V Lead-acid Type Batteries See maintenance chart on next Inspection, Maintenance, and CleaningMaintenance Chart TroubleshootingProblem Possible Causes Probable Solutions Part Description ’ty Parts List EngineAssembly Diagram Engine Please Read the Following Carefully Parts List a GeneratorRecord Product’s Serial Number Here Assembly Diagram a GeneratorEmission Control System Warranty Warranted Parts Warranty

94678 specifications

The Chicago Electric 94678 is a versatile and efficient tool that stands out in the realm of power tools, particularly for DIY enthusiasts and professional contractors alike. Primarily known as a 7-inch angle grinder, this robust equipment is engineered to handle a variety of tasks, from grinding and cutting to polishing and sharpening. Its powerful performance and ergonomic design make it a popular choice for both heavy-duty jobs and detailed work.

One of the standout features of the Chicago Electric 94678 is its motor capacity. Equipped with a robust 15-amp motor, this angle grinder delivers substantial power for tackling tough materials, including metal and masonry. The motor provides variable speed options, allowing users to adjust the RPM according to the specific requirements of their tasks. This flexibility in speed control is essential for achieving optimal results, whether one is cutting through thick metal or finely grinding edges.

The durability of the Chicago Electric 94678 is another highlight. Built with a rugged housing and designed to withstand the rigors of demanding work environments, this tool is constructed to last. Additionally, it features a spindle lock that facilitates quick and easy wheel changes, allowing users to switch attachments efficiently without requiring additional tools.

In terms of safety, the angle grinder includes protective features that enhance user safety during operation. The protective guard can be adjusted to accommodate different cutting or grinding tasks, minimizing the risk of debris injury. Moreover, the tool is designed with a comfortable grip and lightweight body, reducing user fatigue during prolonged use.

Another noteworthy characteristic of the Chicago Electric 94678 is its compatibility with various accessories and attachments, making it a multifunctional tool. Users can easily attach different grinding wheels, cut-off blades, and polishing pads to expand its capabilities further, making it suitable for a wide range of applications.

Overall, the Chicago Electric 94678 combines power, efficiency, and versatility, positioning it as an invaluable addition to any workshop. Whether for professional use or personal projects, its features and robust design cater to a diverse array of tasks, ensuring it meets the demands of modern-day users.
Top Page Image Contents