Chicago Electric 94678 manual Equipment Use And Care, Service

Page 5

3.Remove adjusting keys or wrenches before turning the equipment on. A wrench or a key that is left attached to a rotating part of the equipment may result in personal injury.

4.Do not overreach. Keep proper footing and balance at all times, especially when starting the equipment.

5.Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. Al- ways wear ANSI-approved safety goggles when using or performing maintenance on this equipment.

Equipment Use And Care

1.Do not force the equipment. Use the correct equipment for your application. The correct equipment will do the job better and safer at the rate for which it is de- signed. Do not force the equipment and do not use the equipment for a purpose for which it is not intended.

2.Do not use the equipment if the Power Switch does not turn it on or off. Any equipment that cannot be controlled with the Power Switch is dangerous and must be replaced.

3.Turn the power switch and the fuel supply to off and unplug the spark plug wire before making any adjustments, changing accessories, or storing the equipment. Such preventive safety measures reduce the risk of starting the equip- ment accidentally.

4.Store idle equipment out of reach of children and other untrained persons. Equipment is dangerous in the hands of untrained users.

5.Maintain equipment with care. Do not use a damaged equipment. Tag damaged equipment “Do not use” until repaired.

6.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment’s operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment.

7.Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.

Service

1.Equipment service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.

SKU 94678

For technical questions, please call 1-800-444-3353.

Page

Page 4 Page 6
Image 5
Page 4 Page 6
Contents For technical questions or replacement parts, please call HorsepowerUnpacking ContentsSKU 94678 For technical questions, please call SpecificationsSave This Manual Electrical Safety General Safety RulesPersonal Safety Work AreaEquipment Use And Care ServiceSpecific Safety Rules Keep the Generator and surrounding area clean at all times Installation PrecautionsFire and Explosion Precautions Electrical Precautions Mechanical PrecautionsGrounding the Generator Installation InstructionsGeneral Location Pre-start Checks Generator Control IllustrationsOperation Instructions To Power 110/120 Volt AC Tools and Equipment To Charge 12 V Lead-acid Type Batteries See maintenance chart on next Inspection, Maintenance, and CleaningProblem Possible Causes Probable Solutions TroubleshootingMaintenance Chart Part Description ’ty Parts List EngineAssembly Diagram Engine Please Read the Following Carefully Parts List a GeneratorRecord Product’s Serial Number Here Assembly Diagram a GeneratorEmission Control System Warranty Warranted Parts Warranty

94678 specifications

The Chicago Electric 94678 is a versatile and efficient tool that stands out in the realm of power tools, particularly for DIY enthusiasts and professional contractors alike. Primarily known as a 7-inch angle grinder, this robust equipment is engineered to handle a variety of tasks, from grinding and cutting to polishing and sharpening. Its powerful performance and ergonomic design make it a popular choice for both heavy-duty jobs and detailed work.

One of the standout features of the Chicago Electric 94678 is its motor capacity. Equipped with a robust 15-amp motor, this angle grinder delivers substantial power for tackling tough materials, including metal and masonry. The motor provides variable speed options, allowing users to adjust the RPM according to the specific requirements of their tasks. This flexibility in speed control is essential for achieving optimal results, whether one is cutting through thick metal or finely grinding edges.

The durability of the Chicago Electric 94678 is another highlight. Built with a rugged housing and designed to withstand the rigors of demanding work environments, this tool is constructed to last. Additionally, it features a spindle lock that facilitates quick and easy wheel changes, allowing users to switch attachments efficiently without requiring additional tools.

In terms of safety, the angle grinder includes protective features that enhance user safety during operation. The protective guard can be adjusted to accommodate different cutting or grinding tasks, minimizing the risk of debris injury. Moreover, the tool is designed with a comfortable grip and lightweight body, reducing user fatigue during prolonged use.

Another noteworthy characteristic of the Chicago Electric 94678 is its compatibility with various accessories and attachments, making it a multifunctional tool. Users can easily attach different grinding wheels, cut-off blades, and polishing pads to expand its capabilities further, making it suitable for a wide range of applications.

Overall, the Chicago Electric 94678 combines power, efficiency, and versatility, positioning it as an invaluable addition to any workshop. Whether for professional use or personal projects, its features and robust design cater to a diverse array of tasks, ensuring it meets the demands of modern-day users.
Top Page Image Contents