Chicago Electric 94678 manual Mechanical Precautions, Electrical Precautions

Page 8

6.Do not refill the Fuel Tank while the Engine is running or while the Engine is still hot. Do not operate the Generator with known leaks in the fuel system.

7.Excessive buildup of unburned fuel gases in the exhaust system can create a potentially explosive condition. This buildup can occur after repeated failed start attempts, valve testing, or hot engine shutdown. If this occurs, open exhaust system drain plugs, if equipped, and allow the gases to dissipate before attempting to restart the Generator.

8.Any separate Generator fuel storage facility must be built/installed in full compliance with all relevant local, state, and federal regulations.

MECHANICAL PRECAUTIONS

Do not operate the Generator with safety guards removed. While the Generator is running, do not attempt to reach around the safety guards for any reason.

ELECTRICAL PRECAUTIONS

1.All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable.

2.The Generator must be earth-grounded in accordance with all relevant electri- cal codes and standards before operation.

3.Do not attempt to connect or disconnect load connections while standing in water, or on wet or soggy ground.

4.Insulate all connections and disconnected wires. Do not touch electrically en- ergized parts of the Generator and interconnecting cables or conductors with any part of the body, or with any non-insulated conductive object.

5.Connect the generator only to a load or electrical system (110/120 volt) that is compatible with the electrical characteristics and rated capacities of the Generator.

6.Before servicing equipment powered by the Generator, disconnect the equip- ment from its power input.

7.Keep all electrical equipment clean and dry. Replace any wiring where the insulation is cracked, cut, abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight.

8.Keep access doors on enclosures closed and locked when access is not required.

9.Keep all electrical cords away from moving parts on the generator.

SKU 94678

For technical questions, please call 1-800-444-3353.

Page

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Horsepower For technical questions or replacement parts, please callContents UnpackingSKU 94678 For technical questions, please call SpecificationsSave This Manual General Safety Rules Electrical SafetyPersonal Safety Work AreaService Equipment Use And CareSpecific Safety Rules Keep the Generator and surrounding area clean at all times Installation PrecautionsFire and Explosion Precautions Mechanical Precautions Electrical PrecautionsGrounding the Generator Installation InstructionsGeneral Location Pre-start Checks Generator Control IllustrationsOperation Instructions To Power 110/120 Volt AC Tools and Equipment To Charge 12 V Lead-acid Type Batteries Inspection, Maintenance, and Cleaning See maintenance chart on nextProblem Possible Causes Probable Solutions TroubleshootingMaintenance Chart Parts List Engine Part Description ’tyAssembly Diagram Engine Parts List a Generator Please Read the Following CarefullyAssembly Diagram a Generator Record Product’s Serial Number HereEmission Control System Warranty Warranty Warranted Parts

94678 specifications

The Chicago Electric 94678 is a versatile and efficient tool that stands out in the realm of power tools, particularly for DIY enthusiasts and professional contractors alike. Primarily known as a 7-inch angle grinder, this robust equipment is engineered to handle a variety of tasks, from grinding and cutting to polishing and sharpening. Its powerful performance and ergonomic design make it a popular choice for both heavy-duty jobs and detailed work.

One of the standout features of the Chicago Electric 94678 is its motor capacity. Equipped with a robust 15-amp motor, this angle grinder delivers substantial power for tackling tough materials, including metal and masonry. The motor provides variable speed options, allowing users to adjust the RPM according to the specific requirements of their tasks. This flexibility in speed control is essential for achieving optimal results, whether one is cutting through thick metal or finely grinding edges.

The durability of the Chicago Electric 94678 is another highlight. Built with a rugged housing and designed to withstand the rigors of demanding work environments, this tool is constructed to last. Additionally, it features a spindle lock that facilitates quick and easy wheel changes, allowing users to switch attachments efficiently without requiring additional tools.

In terms of safety, the angle grinder includes protective features that enhance user safety during operation. The protective guard can be adjusted to accommodate different cutting or grinding tasks, minimizing the risk of debris injury. Moreover, the tool is designed with a comfortable grip and lightweight body, reducing user fatigue during prolonged use.

Another noteworthy characteristic of the Chicago Electric 94678 is its compatibility with various accessories and attachments, making it a multifunctional tool. Users can easily attach different grinding wheels, cut-off blades, and polishing pads to expand its capabilities further, making it suitable for a wide range of applications.

Overall, the Chicago Electric 94678 combines power, efficiency, and versatility, positioning it as an invaluable addition to any workshop. Whether for professional use or personal projects, its features and robust design cater to a diverse array of tasks, ensuring it meets the demands of modern-day users.
Top Page Image Contents