11.Use a
Plug (28A). Clean with compressed air to remove residue. (See Figure I.)
12.Measure the electrode gap with a suitable gauge. The gap should be 0.028” to 0.031”. If necessary, correct the gap by carefully bending the side of the electrode.
(See Figure I.)
13.Reinstall the Spark Plug (28A) carefully to avoid
14.Daily: Inspect the Fuel Filter (32).
15.To do so, remove the Fuel Tank Cap (34) from the Fuel Tank (31).
(See Figure J.)
16.If necessary, use compressed air to remove any dirt and debris from the Fuel Filter (32). Then replace the Fuel Filter and Fuel Tank Cap (34). (See Figure J.)
When storing the Generator for extended periods: Before storing, drain all fuel out of the Engine’s Fuel Tank (31). If this is not followed, old fuel in the Fuel Tank may clog the Carburetor of the Engine and prevent it from starting until cleaned out. Then make sure to store the unit in a clean, dry, safe location out of reach of children and other unauthorized people.
PLEASE READ THE FOLLOWING
The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto.
SKU 66603 | For technical questions, please call | Page 18 |