|
|
|
|
|
| Symbology | |
V~ | Volts Alternating Current | ||
A | Amperes | ||
| |||
|
|
|
|
n0 xxxx/min. | No Load Revolutions per Minute | ||
(RPM) | |||
UNPACKING
When unpacking, check to make sure all of the parts shown on the Parts List in this manual are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover (and at the bottom of each page) of this manu- al as soon as possible.
CONTROL PANEL FEATURES
1.Engine Switch (2): Used to start and stop the Engine. To start, insert the Engine Switch Key and turn to the right to its “START” position. Then immediately release the Key. To turn off the Engine, turn the Key all the way to the left to its
“OFF” position. Always remove the Key from the Engine Switch when the unit is not in use.
(See Figure A, above.)
2.Outlet Sockets (8, 10, 10B): The Generator features three Outlet Sockets with which to power tools and equipment. The type and voltage of the Outlet Sockets are as follows:
SKU 66603 | For technical questions, please call | Page 9 |