MECHANICAL PRECAUTIONS
1.Prior to performing service, maintenance, or cleaning procedures, always make sure the Engine Switch is in its “OFF” position. Allow the Engine to completely cool. Then, remove the Spark Plug Wire from the Spark Plug.
2.Do not alter or adjust any part of the Generator or its Engine that is assembled and supplied by the manufacturer or distributor.
3.Always follow and complete scheduled Engine maintenance.
CHEMICAL PRECAUTIONS
1.Avoid contact with hot fuel, oil, exhaust fumes, and solid surfaces.
2.Avoid body contact with fuels, oils, and lubricants used in the Engine. If swallowed, seek immediate medical treatment. Do not induce vomiting if fuel is swallowed. For skin contact, immediately wash with soap and water. For eye contact, immediately flush eyes with clean water.
NOISE PRECAUTION
Prolonged exposure to high noise levels is hazardous to hearing. Always wear
ELECTRICAL PRECAUTIONS
1.All connections and conduits from the Generator to the load must only be installed by trained and licensed electricians, and in compliance with all relevant local, state, and federal electrical codes and standards, and other regulations where applicable.
2.The Generator must be
SKU 66603 | For technical questions, please call | Page 7 |