Tascam owner manual Features of the CD-RW700-Front panel

Page 11

2 • Features of the CD-RW700—Front panel

2.1 Front panel

1POWER switch (STANDBY/ON)

The power switch is used to switch the unit between standby mode (the time from the internal clock is displayed) and on (full operational mode).

When the unit is turned on, the display shows

Welcome!.

ADISPLAY key

Repeated presses of this key cycle through the differ- ent time display modes. These modes differ, accord- ing to whether the unit is playing back or recording a disc.

BMULTI JOG control

Use this control to select tracks for playback, to set parameter values, etc.

2Disc tray

Discs should be placed label side upwards in the disc tray.

When a disc is loaded into the unit, the display briefly shows TOC Reading., with a flash- ing period following the word “Reading” as the unit determines the contents of the disc.

Typically, turning the control clockwise will increase a value, and turning it counterclockwise will decrease the value. There is no “end-stop” to the con- trol—it may be turned continuously in either direction.

In addition, pushing the control acts like an “enter” key, i.e. the currently-displayed value or setting is confirmed.

3OPEN/CLOSE key

Use this key to open and close the disc tray. The dis- play shows OPEN when the tray is opening and CLOSE when the tray is closing.

4RHSL key

CTIMER switch (PLAY, OFF, REC)

Use this switch with the timer functions to control the behavior of the unit when the timer “on” time is reached. See 2.5, “Timer operations” for details.

DPHONES jack and LEVEL control

Use this key when recording to set and adjust the start point of a recording session or the start of a track on the recorded disc. See 4.4, “Rehearsal” for details.

5DIGITAL DIRECT

When this is active, any digital audio signals input to the unit bypass the frequency convertor and the digi- tal volume control. See 4.3.4, “Digital direct” for details

6INPUT SELECT

Repeated presses of this key cycle through the differ- ent audio inputs and the input combinations. See 4.1, “Input selection” for full details.

7REMOTE SENSOR

This is not a control, but the sensor for the remote control unit. When using the remote control unit, make sure that there is a clear path from the remote control unit to the sensor.

8Display

The display is used to show the current status of the unit, as well as the current menu settings. See 2.2, “Rear panel” for details.

9MENU key

Repeated presses of this key cycle through the differ- ent menu items used to set parameters.

Use a standard pair of stereo headphones, equipped with a 1/4-inch plug, with this jack.

Adjust the volume from the jack with the control (turn clockwise for higher volume).

EREC LEVEL controls

Use these concentric controls to adjust the level of the analog audio signals received at the ANALOG IN jacks N. Typically, turning one of these controls will cause the other to turn, but they can be turned inde- pendently of each other.

Use the lower (outer) control to adjust the left signal, and the upper (inner) control to adjust the right signal.

Turning the controls clockwise past the “5” position will boost the signals relative to their input level, and turning them counterclockwise to a position below “5” will cut the signals relative to their original input level.

FFINALIZE key

Use this key to finalize recordable discs. See 1.2, “Finalizing” and 5.1, “Finalizing” for details.

GERASE key

Use this key (with CD-RW discs only) to erase tracks, or a whole disc, or to refresh a “bad” disc, or

TASCAM CD-RW700 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CD-RW700 Do not cut off the mains plug from this equipment Important Safety PrecautionsImportant Safety Instructions Pour le Canada For CanadaTable of Contents About CD-R and CD-RW discs IntroductionEnvironmental considerations Introduction-FinalizingFinalizing Unpacking the CD-RW700Handling of compact discs Introduction-Environmental considerationsBeware of condensation Never use a stabilizer or printable discsRecommended media Default settingsDimensional drawing Features of the CD-RW700 Front panel Features of the CD-RW700-Front panelRear panel Features of the CD-RW700-Rear panelRemote control unit Connections Features of the CD-RW700-ConnectionsTimer operations Using the timer Features of the CD-RW700-Timer operationsSetting the timer Track search Playback operationsSimple playback operations Time display modesRepeat play Playback operations-Programmed order playbackProgrammed order playback Input monitoring Signal volumeRecording Input selectionTime display while recording Recording-Basic recordingBasic recording Playing back tracksAdvanced recording Recording-Advanced recording66, and -72dB Automatic track division Automatic track increment Digital directFade-in and fade-out Recording-RehearsalRehearsal Rec mute functionPress the Rhsl key 4 so that the display shows Waiting Sync Rehearsal for synchronized recordingRehearsal for track division Erasing tracks After recordingErasing 1 Unfinalizing CD-RW discsRefreshing a disc After recording-ErasingErasing a whole disc Specifications Reference and specificationsTroubleshooting

CD-RW700 specifications

The Tascam CD-RW700 is a professional-grade audio CD recorder designed for serious musicians, sound engineers, and audio enthusiasts. With a robust build quality and a multitude of features, this unit is well-suited for both studio and live settings.

One of the standout features of the CD-RW700 is its ability to record, erase, and re-record on CD-R and CD-RW media. This flexibility allows users to create high-quality CDs for various applications, from music albums to archival projects. The CD-RW700 employs a sophisticated digital-to-analog converter, ensuring pristine sound quality during playback and recording.

The unit supports a variety of recording formats, including CD-DA, WAV, and MP3, catering to different audio needs. The high-speed dubbing function allows for rapid copying of CDs, making it ideal for situations where time is of the essence. Additionally, the device features a high-quality pitch control and signal processing function, enabling users to adjust the pitch and tempo of recordings with ease.

Equipped with a clear LCD display, the CD-RW700 provides users with real-time feedback on recording levels, time elapsed, and remaining time. This user-friendly interface enhances the overall experience, allowing for straightforward navigation and operation. The built-in metronome and tuner serve as useful tools for musicians during recording sessions.

Connectivity is another strong point of the CD-RW700. It features balanced XLR inputs and outputs, as well as unbalanced RCA connections, ensuring compatibility with a wide range of audio equipment. The inclusion of a coaxial digital input and output further enhances its versatility, allowing for high-quality digital transfers.

The CD-RW700 also supports various anti-shock technologies, ensuring smooth playback without interruptions during live performances or sensitive recordings. This reliability makes it an excellent choice for both professional studios and home setups.

In conclusion, the Tascam CD-RW700 combines advanced recording technologies with comprehensive features, making it an essential tool for anyone looking to produce high-quality audio CDs. Its robust design, user-friendly interface, and versatile connectivity options position it as a leading choice in the realm of CD recording equipment. Whether you’re a musician, producer, or sound technician, the Tascam CD-RW700 offers the reliability and performance needed to meet demanding audio requirements.
Top Page Image Contents