Tascam CD-RW700 owner manual Rehearsal for track division

Page 25

12 Start playing the source material. The unit starts recording, with the start point being determined by the trim value.

NOTE

If a trim setting is made for the sync start, this will apply to all sync starts and track divisions made in the future until the value is reset using the procedure above.

4.4.2Rehearsal for track division

In the same way that the automatic threshold may produce a false trigger, starting recording at the wrong point, the automatic threshold may produce false track divisions.

By rehearsing the point at which the track division is to be made, it is possible to trim the division point so that it corresponds to a the track division which is actually required.

1Load a recordable disc into the unit and make sure the unit is in stop mode.

2If the unit is not already in auto track mode, set it so that the A-TRACKindicator is lit on the display (4.3.2, “Automatic track division”).

3Cue the source material to a little before the point of the planned track division.

4Press the RHSL key 4 twice so that the display shows Waiting Inc.

If the auto track mode has not previously been selected, the display shows No Inc Mode when the key is pressed.

5Start playing the source. When the start of the track is detected (as explained in 4.3.1, “Syn- chronized recording”), the display changes to

Inc RHSL.

6If the rehearsal does not start at the region of the true track division point, press the RHSL key once again to “re-arm” the trigger.

7After nine seconds, the message changes from

Inc RHSL, and the sampled data loops in

4 • Recording—Rehearsal

a four-second loop. The display shows Inc 0:0X, where X is the current second of the loop.

8Stop the source.

9Turn the MULTI JOG control B to adjust the

point of the loop. The display shows:

TRIM = +XXXf or

TRIM = -XXXf, where XXX can be a number between 0 and 125 and changes back to the Inc 0:0x display when the loop restarts.

10 When the track division point has been fixed, press the STOP key (H or J).

11 Press the RECORD key (K or E) to enter record ready mode. The synchronized record- ing mode can be used here, and so the SYNC REC key (L or F) may be pressed to prepare for synchronized recording.

12 Cue up the source material to the point where recording is to start.

13 Start playing the source material. If sync recording is not being used, start recording on the CD-RW700 (otherwise recording starts automatically).

When the track division point (plus or minus the trim value set earlier) is reached, the recording will divide into tracks.

Note that if a positive trim value is set (i.e. the start point of the track is “slipped” to a position past the “normal” start), the counter shows a minus value (e.g. -0.02) for the period between the “normal” and the actual adjusted start position. This minus value is also displayed when recording starts, if sync recording has been enabled.

NOTE

If a trim setting is made for the track division, this will apply to all track divisions and sync starts made in the future until the value is reset using the procedure above.

TASCAM CD-RW700 25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents CD-RW700 Do not cut off the mains plug from this equipment Important Safety PrecautionsImportant Safety Instructions Pour le Canada For CanadaTable of Contents About CD-R and CD-RW discs IntroductionFinalizing Introduction-FinalizingUnpacking the CD-RW700 Environmental considerationsBeware of condensation Introduction-Environmental considerationsNever use a stabilizer or printable discs Handling of compact discsDimensional drawing Default settingsRecommended media Features of the CD-RW700 Front panel Features of the CD-RW700-Front panelRemote control unit Features of the CD-RW700-Rear panelRear panel Timer operations Features of the CD-RW700-ConnectionsConnections Setting the timer Features of the CD-RW700-Timer operationsUsing the timer Simple playback operations Playback operationsTime display modes Track searchProgrammed order playback Playback operations-Programmed order playbackRepeat play Recording Signal volumeInput selection Input monitoringBasic recording Recording-Basic recordingPlaying back tracks Time display while recordingAdvanced recording Recording-Advanced recording66, and -72dB Automatic track division Automatic track increment Digital directRehearsal Recording-RehearsalRec mute function Fade-in and fade-outPress the Rhsl key 4 so that the display shows Waiting Sync Rehearsal for synchronized recordingRehearsal for track division Erasing After recording1 Unfinalizing CD-RW discs Erasing tracksErasing a whole disc After recording-ErasingRefreshing a disc Troubleshooting Reference and specificationsSpecifications

CD-RW700 specifications

The Tascam CD-RW700 is a professional-grade audio CD recorder designed for serious musicians, sound engineers, and audio enthusiasts. With a robust build quality and a multitude of features, this unit is well-suited for both studio and live settings.

One of the standout features of the CD-RW700 is its ability to record, erase, and re-record on CD-R and CD-RW media. This flexibility allows users to create high-quality CDs for various applications, from music albums to archival projects. The CD-RW700 employs a sophisticated digital-to-analog converter, ensuring pristine sound quality during playback and recording.

The unit supports a variety of recording formats, including CD-DA, WAV, and MP3, catering to different audio needs. The high-speed dubbing function allows for rapid copying of CDs, making it ideal for situations where time is of the essence. Additionally, the device features a high-quality pitch control and signal processing function, enabling users to adjust the pitch and tempo of recordings with ease.

Equipped with a clear LCD display, the CD-RW700 provides users with real-time feedback on recording levels, time elapsed, and remaining time. This user-friendly interface enhances the overall experience, allowing for straightforward navigation and operation. The built-in metronome and tuner serve as useful tools for musicians during recording sessions.

Connectivity is another strong point of the CD-RW700. It features balanced XLR inputs and outputs, as well as unbalanced RCA connections, ensuring compatibility with a wide range of audio equipment. The inclusion of a coaxial digital input and output further enhances its versatility, allowing for high-quality digital transfers.

The CD-RW700 also supports various anti-shock technologies, ensuring smooth playback without interruptions during live performances or sensitive recordings. This reliability makes it an excellent choice for both professional studios and home setups.

In conclusion, the Tascam CD-RW700 combines advanced recording technologies with comprehensive features, making it an essential tool for anyone looking to produce high-quality audio CDs. Its robust design, user-friendly interface, and versatile connectivity options position it as a leading choice in the realm of CD recording equipment. Whether you’re a musician, producer, or sound technician, the Tascam CD-RW700 offers the reliability and performance needed to meet demanding audio requirements.
Top Page Image Contents