Tascam CD-RW700 owner manual Playback operations-Programmed order playback, Repeat play

Page 16

3 • Playback operations—Programmed order playback

NOTE

Selecting the playback mode is only possible using the remote control unit. It is not possible to select the playback mode using the main unit alone.

1Press the PLAY MODE key B repeatedly to cycle the display through the following:

•Program (see 3.2, “Programmed order play- back” below). The red PROGRAM display indicator lights in this mode.

•Shuffle (random track order). In this mode, each track is played once before the disc repeats. Using the track search functions will move back- wards or forwards through the random order, e.g. if track 7 is followed by track 10, it is possible to use the track search keys to go back to track 7, which is remembered as being before immediately before track 10. The red SHUFFLE display indicator lights in this mode.

•Continue. Normal playback mode. Pro- gramming is cancelled, and playback continues in the normal order.

The selected mode is shown in large characters dis- appears from the display a few seconds after select- ing the mode, and the display returns to its previous mode.

3.2 Programmed order playback

The steps to set up to 25 program steps (tracks) to be played back in a specified order are as follows:

1Press the PLAY MODE key B until the display shows Program.

2The display changes to show

0Tr 0:00 00,

meaning that no program steps have yet had tracks assigned to them.

3Use the number keys to enter a track number (including the +10 key to enter values greater than 9, as described in 3.1.2, “Track search”). There is no need to press ENTER.

The track entered is assigned to the program step, and the display changes, showing the track number, the total time of the program so far, and the step number, e.g.

2Tr14:56 03.

4The next program step can then be entered.

NOTE

5Repeat steps 3 and 4 above until the program is complete.

6Press the PLAY key (I or L) to start playback at the first program step.

The display shows the track, the current time display, and the program step number.

While in programmed playback mode, using the SKIP keys I or the MULTI JOG control B

moves backwards and forwards in the order set in the program.

Use the PAUSE key (J or K) to halt playback tem- porarily or the STOP key (H or J) to stop playback of the program.

If the STOP key is used, when playback is restarted, it starts from the first program step.

Clear the program by pressing PLAY MODE B until the display shows Continue. The program is also cleared when the disc tray is opened, and if the STOP key is pressed when playback is stopped in programmed order mode.

The programmed play order is not memorized when power is turned off.

If an attempt is made to enter more than 25 program steps, the message PGM Full ! appears on the display.

3.3 Repeat play

The unit can repeat the whole of the disc (or pro- gram) or the current track only.

NOTE

Selecting the repeat mode is only possible using the remote control unit. It is not possible to select the repeat mode using the main unit alone.

1The unit should be in playback, pause or stop mode.

2Continue to press the REPEAT key 5 so that

the display shows Repeat 1 (the REPEAT 1 indicator lights) to repeat one track, or Repeat ALL (the REPEAT ALL indicator lights) to repeat the whole disc or program.

3If playback has not started, restart it.

To cancel repeat mode, press the REPEAT key so that the display shows Repeat OFF and the REPEAT indicator goes out.

Steps 3 and 4 above can be carried out from the main unit by turning and pushing the MULTI JOG control B.

16 TASCAM CD-RW700

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CD-RW700 Important Safety Precautions Do not cut off the mains plug from this equipmentImportant Safety Instructions For Canada Pour le CanadaTable of Contents Introduction About CD-R and CD-RW discsIntroduction-Finalizing FinalizingUnpacking the CD-RW700 Environmental considerationsIntroduction-Environmental considerations Beware of condensationNever use a stabilizer or printable discs Handling of compact discsDimensional drawing Default settingsRecommended media Features of the CD-RW700 Features of the CD-RW700-Front panel Front panelRemote control unit Features of the CD-RW700-Rear panelRear panel Timer operations Features of the CD-RW700-ConnectionsConnections Setting the timer Features of the CD-RW700-Timer operationsUsing the timer Playback operations Simple playback operationsTime display modes Track searchProgrammed order playback Playback operations-Programmed order playbackRepeat play Signal volume RecordingInput selection Input monitoringRecording-Basic recording Basic recordingPlaying back tracks Time display while recordingRecording-Advanced recording Advanced recording66, and -72dB Automatic track division Digital direct Automatic track incrementRecording-Rehearsal RehearsalRec mute function Fade-in and fade-outRehearsal for synchronized recording Press the Rhsl key 4 so that the display shows Waiting SyncRehearsal for track division After recording Erasing1 Unfinalizing CD-RW discs Erasing tracksErasing a whole disc After recording-ErasingRefreshing a disc Troubleshooting Reference and specificationsSpecifications

CD-RW700 specifications

The Tascam CD-RW700 is a professional-grade audio CD recorder designed for serious musicians, sound engineers, and audio enthusiasts. With a robust build quality and a multitude of features, this unit is well-suited for both studio and live settings.

One of the standout features of the CD-RW700 is its ability to record, erase, and re-record on CD-R and CD-RW media. This flexibility allows users to create high-quality CDs for various applications, from music albums to archival projects. The CD-RW700 employs a sophisticated digital-to-analog converter, ensuring pristine sound quality during playback and recording.

The unit supports a variety of recording formats, including CD-DA, WAV, and MP3, catering to different audio needs. The high-speed dubbing function allows for rapid copying of CDs, making it ideal for situations where time is of the essence. Additionally, the device features a high-quality pitch control and signal processing function, enabling users to adjust the pitch and tempo of recordings with ease.

Equipped with a clear LCD display, the CD-RW700 provides users with real-time feedback on recording levels, time elapsed, and remaining time. This user-friendly interface enhances the overall experience, allowing for straightforward navigation and operation. The built-in metronome and tuner serve as useful tools for musicians during recording sessions.

Connectivity is another strong point of the CD-RW700. It features balanced XLR inputs and outputs, as well as unbalanced RCA connections, ensuring compatibility with a wide range of audio equipment. The inclusion of a coaxial digital input and output further enhances its versatility, allowing for high-quality digital transfers.

The CD-RW700 also supports various anti-shock technologies, ensuring smooth playback without interruptions during live performances or sensitive recordings. This reliability makes it an excellent choice for both professional studios and home setups.

In conclusion, the Tascam CD-RW700 combines advanced recording technologies with comprehensive features, making it an essential tool for anyone looking to produce high-quality audio CDs. Its robust design, user-friendly interface, and versatile connectivity options position it as a leading choice in the realm of CD recording equipment. Whether you’re a musician, producer, or sound technician, the Tascam CD-RW700 offers the reliability and performance needed to meet demanding audio requirements.
Top Page Image Contents