Olympus LS-100 user manual Troubleshooting, Symptom Probable cause Action

8

Troubleshooting

Troubleshooting

Symptom	Probable cause	Action
	The battery is not loaded properly	Verify that the battery's polarities + and - are correct
		(☞ P. 22).
Nothing appears on
	Battery power is getting low.	Charge the battery or replace with a new battery
the display
		(☞ P. 22).
	The power is off.	Turn the power on (☞ P. 25).
	Battery power is getting low.	Charge the battery or replace with a new battery
		(☞ P. 22).
Won't start	The power is off.	Turn the power on (☞ P. 25).
	The recorder is in HOLD mode.	Release the recorder from HOLD (☞ P. 26).
	No remaining memory.	Erase unnecessary files (☞ P. 50).
Unable to record
	The maximum number of files	Change to any other folder (☞ P. 34).
	has been reached.
Unable to record	An external microphone that	Set [Plug-in Power] to [On] when an
	must be supported by plug-in	external microphone that must be
through the external
	power is connected but [Plug-	supported by plug-in power is connected
microphone
	in Power] is set to [Off ].	( ☞ P.75).
No playback sound	The headphone is connected.	Unplug the headphone to use the internal speaker.
heard	The volume level is set to [0].	Adjust the volume level (☞ P. 46).
	The recording level has not	Adjust the recording level and then try recording once
	been adjusted.	more (☞ P. 82).
Recording level too	The microphone sensitivity is too	Set [Mic Sense] to [HI] or [MID] and then try recording
	low.	once more (☞ P. 81).
low
	This could potentially be because	If adjusting the recording level does not help you
	the output level for the connected	get a clear recording, adjust the output level for the
	external devices is too low.	connected devices.
	The recording level has not	Adjust the recording level and then try
	been adjusted.	recording once more ( ☞ P.37).
Recording level too
	This could potentially be	If you cannot record clearly even after adjusting the
high	because the recording level
		recording level, then adjust the output level for the
	and output level for connected
		connected devices ( ☞ P.37).
	external devices is too high.
Files are not recorded	The connected external	When recording while an external monaural
		microphone is connected, the sound will only be
in stereo	microphone is monaural.
		recorded by the L-channel.

EN

126