Olympus LS-100 user manual Bounce Bounce, Setting 1File, Setting Selected Files, Home Multitrack

File menu [File Menu]

Setting [1File]

1Select the file with the +/− button and press the OK button.

Recorder Mode Multi-Track Mode

Setting [Selected Files]

1Select a file with the +/− button and press the OK button to mark the file.

Recorder Mode Multi-Track Mode

2Repeat step 1 to select other files, and press the F2 (OK) button.

7 Press the + button to select [Start].

8 Press the OK button.

•The animation is displayed on the screen, and CD Write starts. When [Done] is displayed, CD Write is finished.

A

•When [CD Write] (☞ P. 107) is set to the Fn button, pressing the allocated button starts the CD write.

Notes
• To make the writing more reliable, use the AC		6
power supply to power the external CD drive.
• A few minutes may pass before the process		File
completes. Avoid conducting the following
operations in order to prevent damage to data.		menu
In addition, check the remaining battery level
beforehand in order to avoid running out of the
battery during the process.
1	Disconnecting the USB cable during the
	process.
2	Removing the battery during the process.
3	When the recording medium is [SD card],
	removing the SD card during processing.
4	Turning off the external CD drive during
	processing.
5	Removing the CD during processing.

Bounce [Bounce]

Multiple tracks saved in a multi-track mode project can be grouped into a single stereo track.

1 [Home] { [Multitrack]

EN

99