Using the recorder on your PC

Disconnecting from your PC

Windows

Macintosh

7

Using the recorder on your PC

1 Click [ ] on the task bar located at the lower-right corner of the

screen. Click [Safely remove USB Mass Storage Device].

The drive letter will differ depending on the PC being used.

2 Be sure that the recorder PEAK indicator light (R) is off before disconnecting the USB cable.

The PEAK indicator light (R) will light up orange while the recorder is charging. The USB cable may be removed during the charging operation.

1 Drag and drop the drive icon for this recorder displayed on the desktop to the Recycle Bin icon.

2 Make sure that the recorder PEAK indicator light (R) is off before disconnecting the USB cable.

The PEAK indicator light (R) will light up orange while the recorder is charging. The USB cable may be removed during the charging operation.

EN

Notes

NEVER disconnect the USB while the PEAK indicator light (R) is flashing. If you do, the data may be destroyed.

For more information on the USB port on your PC, refer to the user's manual for your PC.

Be sure to connect the USB cable directly to the USB port on your PC.

Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.

120

Page 120
Image 120
Olympus LS-100 Disconnecting from your PC, Windows, Screen. Click Safely remove USB Mass Storage Device, Macintosh