Olympus LS-100 Important Notes on Erasing, Disconnect the AC adapter Remove the battery

Erasing

3

Erasing

EN

▌Important Notes on Erasing

•Once erased, files cannot be recovered. Check carefully before erasing files.

•When you have an SD card inserted in the recorder, make sure to check if your memory selection is set to [Internal memory] or [SD card] (☞ P. 108).

•Locked or read-only files cannot be erased (☞ P. 91).

•No more recordings can be made when

[Memory full] appears. Erase unnecessary files before continuing to record.

•Files that the recorder does not recognize, as well as folders containing such files, will not be erased. To erase them, connect the recorder to your computer.

•Check the remaining battery level beforehand in order to avoid running out of the battery during the process. Note that the erasing process may take a few tens of seconds. Never perform the following operations while erasing is in progress, as doing so may damage your data:

1 Disconnect the AC adapter.

2 Remove the battery.

3 Remove the SD card while the recording medium is set to [SD card].

52