63
EN
4
Creating a Multi-Track Project
5 Press the STOP button to stop recording
and playback.
9
Repeat steps 3 to 6 to
add more sound
sources to empty
tracks.
10 Bounce the tracks
This recorder allows you to save up to 8 tracks
under 1 project. Once you run out of empty
tracks, create bounce files and assign them to
tracks.
You can bounce any of the files that are currently
assigned to tracks.
1 Press the preassigned Fn (Bounce)
button.
• Be sure to assign the [Bounce] function to
the Fn button in advance (☞ P. 107 ).
2 Press the OK button.
• An animation will appear on the display, and
bouncing starts.
• [Done] appears when the bouncing is
complete. It will be saved as a new PCM
format [44.1kHz/16bit] file under the same
project.
Creating a Multi-Track Project