Olympus LS-100 user manual 127

Troubleshooting

Symptom	Probable cause		Action
		When the built-in speaker amps and the like are
		connected there is a risk that audio feedback will occur
Noise is audible		while recording. It is recommended that you use a
through the	Acoustic feedback is occurring.	headphone for the recording monitor.
recording monitor		Perform adjustments, such as further distancing the
		headphone from the microphone, and not pointing
		the headphone at the microphone.
	The maximum number of marks	Erase unnecessary marks (☞ P. 48).
	(99) has been reached.
Unable to set index
	The file is locked.	Unlock the file (☞ P. 91).
marks
	The file is read-only.	Unlock the file or cancel the read-only setting of the file
		on the PC.
	Contains battery other than	Use the supplied rechargeable batteries.
	the specified battery.
	The battery is not properly	Insert the battery properly.
	inserted.
Cannot recharge
		Change the USB class setting to [Storage] (☞ P. 110).
	USB class set to [Composite].
		Connect the recorder via USB while pressing and
		holding the STOP button to recharge it (☞ P. 24).
Cannot find files	Wrong folder.	Switch to the correct folder (☞ P. 34).
	The recorder was wiped or shaken
Noise heard during	during recording.
	The recorder was placed near a cell
playback
	phone or fluorescent lamp while	Move the recorder.
	recording or during playback.
	The file is locked.	Unlock the file (☞ P. 91).
Unable to erase a file
	The file is read-only.	Unlock the file or cancel the read-only setting of the
		file on the PC.
Unable to erase a	There is a file that cannot be
	recognized by the recorder in the	Connect the recorder to your PC and erase the folder.
folder
	folder.
No sound is produced	The track is muted.	Cancel the mute condition (☞ P. 61).
from a certain track in
	The output volume of the track	Increase the output volume of the track (☞ P. 62).
the Multi-Track Mode
	is reduced.

8

Troubleshooting

EN

127