Sears 944.528117 owner manual Ass, Operatic, Install Discharge Chute / Chute Rotater

Page 7

ASS

LY / P

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

1.Retrieve vinyl sleeve and spring from bag of parts and retrieve the auger control rod from carton chute tray. Slide straight rod end through the small hole in the vinyl sleeve. Hook spring in hole in rod end.

2.Hook end of spring into control arm with loop opening up as shown. (See Fig. 5)

3.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

E-OPERATIC

INSTALL DISCHARGE CHUTE / CHUTE ROTATER

HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces-

sary, rotate chute assemblyto align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and Iocknut on threaded stud and tighten securely.

CHUTE

ROTATER_3/8LOCKNUT HEAD

_3/8WASHER

CONTROL

ARM

PIN

STUD

ROTATER HEAD

MOUNTING

BRACKET

FIG. 7

FIG. 5

AUGER CONTROL ROD AUGER

CONTROL

RETAINER LEVER

SPRING\

CONTROL

BRACKET

FIG. 6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Powe -P LLE Safe Operation Practices for Walk-Behind Snow Throwers Contents Page Operatio HOW to SET UP Your Snow ThrowerParts Packe ELY CartonSee Figs Install Traction Drive Control RODAsse BLY/PRE-OPERATION Unfold Upper HandleASS Install Discharge Chute / Chute RotaterOperatic Check Tire Pressure Install Chute Deflector Remote ControlKnow Your Snow Thrower Operati Meets A.N.S.I. Safety RequirementsAuger HOW to USE Your Snow ThrowerStopping Traction DriveOperation To Start Engine Before Starting the EngineCold Start Electric Starter Before Stopping Warm Start Electric StarterCold Start Recoil Starter Warm Start Recoil StarterTires General RecommendationsBefore Each USE Snow ThrowerEngine CleaningSeadj Ents To Adjust Snow Thrower HeightEquipment shear bolts as supplied with your snow thrower Seadj Engine Speed CarburetorEngine OIL StorageOther Fuel SystemOTI Problem Cause CorrectionExploded \17DESCRiPTiON Carriage Auger HousingDescription Scraper BARPart KEYDeflector Weldment Deflector Control AssemblyService Part Deflector Control Chute WeldmentRotator Pivot Bracket LEVER/CABLE Rotator AssemblyCable Assembly Adjustable Rotator HeadInterlock Shifter ROD TOP Impeller ROD AssemblyTraction ROD Assembly Wire HarnessSpacer Sprocket Axle AssemblyAssy of IA,1B Axle Shaft2325 01.02.013-A END Plate Speed Selector AssemblyDrive Plate Assembly Rubber RingFrame Cover AssemblyEngine Mount Plate Washer Idler ARM Bracket KEY Part NO. noImpeller Belt Traction BeltKEY Part Wheel AssemblyWrench Power CordSafety Ignition KEY Retainer PINInstruction Service Notes Engine 472 Model DIPSTICK/TUBE Assembly Wire AssemblySWITCH-STOP Control Bracket BOOT-SPARK PlugWWW,SeSrS,C8 800-.4-.MY-.HOME