MTD E740, E760 manual To Stop Engine, To Engage Drive, To Engage Augers, Operating Tips

Page 12

TO STOP ENGINE

1.Run engine for a few minutes before stopping to help dry off any moisture on the engine.

2.To help prevent possible freeze-up of starter, proceed as follows.

Connect power cord to switch box on engine, then to 120 volt AC receptacle. With the engine running, push starter button and spin the starter for several seconds. The unusual sound made by spinning the starter will not harm engine or starter. Disconnect the power cord from receptacle first, and then from switch box.

Recoil Starter (Optional Instructions): With engine running, pull starter rope with a rapid, continuous full arm stroke three or four times. Pulling the starter rope will produce a loud clattering sound, which is not harmful to the engine or starter.

3.To stop engine, remove the ignition key. Do not turn key. Disconnect the spark plug wire from the spark plug to prevent accidental starting while equipment is unattended.

NOTE: Do not lose ignition key. Keep it in a safe place. Engine will not start without the ignition key.

4.Wipe all snow and moisture from the carburetor cover in the area of the control levers. Also, move control levers back and forth several times. Leave throttle control lever in the STOP or OFF position. Leave choke control in the FULL choke position.

SHUT OFF ENGINE

BEFORE UNCLOG-

GING DISCHARGE

CHUTE.

5784

TO ENGAGE DRIVE

1.With the engine running near top speed, move shift lever into one of the six FORWARD positions or two REVERSE positions. Select a speed appropriate for the snow conditions that exist. Use the slower speeds until you are familiar with the operation of the snow thrower.

2.Squeeze the traction drive clutch grip against the right handle and the snow thrower will move. Release it and the drive motion will stop.

NOTE: NEVER move shift lever without first releasing the drive clutch.

TO ENGAGE AUGERS

To engage the augers and start the snow throwing action, squeeze the auger clutch grip against the left handle. Release to stop the augers (traction drive clutch grip must also be released).

The auger drive clutch can also be locked so you can turn the chute crank without interrupting the snow throwing process. Refer to “Traction Drive/ Auger Clutch Lock” in the Control section.

OPERATING TIPS

NOTE: Allow the engine to warm up for a few minutes as the engine will not develop full power until it reaches operating temperature.

WARNING: Temperature of muffler and surrounding areas may exceed 150oF. Avoid these areas.

1.For most efficient snow removal, remove snow immediately after it falls.

2.Discharge snow downwind whenever possible. Slightly overlap each previous swath.

3.Set the skid shoes 1/4" below the scraper bar for normal usage. The skid shoes may be adjusted upward for hard-packed snow. Adjust downward when using on gravel or crushed rock.

4.Be certain to follow the precautions listed under ‘‘To Stop Engine’’ on page 12 to prevent possible freeze-up.

5.Clean the snow thrower thoroughly after each use.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioImportant Safe Operation Practices TrainingPreparation OperationMaintenance and Storage Safety labels found on your snow throwerFinding Your Model Number Calling Customer SupportContents of Hardware Pack Assembly Instructions Attaching the Handle AssemblyUnpacking Attaching the Chute Assembly Attaching the Chute CrankHardware B Hardware CAttaching the Shift ROD Attaching the Clutch CablesAttaching the Track Controls Hardware DFinal Adjustments Controls Auger Drive ClutchLeft and Right Track Controls Track Lock LeverOperation GAS and OIL FILL-UPTo Start Engine Ignition Key Starter Choke Handle Primer ThrottleTo Stop Engine To Engage DriveTo Engage Augers Operating TipsAdjustments Lubrication Maintenance Auger BeltsDrive Belt Changing the Friction Wheel Rubber FrictionDisc Drive BeltOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionGear Assembly Handle Assembly Handle Assembly Blower Housing 26’’ Track and Frame Track and Frame Description Qty Engine and V-Belts Page MANUFACTURER’S Limited Warranty for

E760, E740 specifications

The MTD E740 and E760 represent a significant advancement in outdoor power equipment, particularly in the realm of lawn care and maintenance. Both models are designed to cater to the needs of homeowners and professionals alike, providing them with reliable, efficient, and user-friendly mowing solutions.

One of the main features of the MTD E740 and E760 is their robust 21-inch steel cutting deck. This durable construction ensures that the mower can withstand the rigors of frequent use, while also delivering a precise cutting performance. The wide cutting deck allows for efficient mowing of larger lawns, reducing the time and effort required to achieve a pristine lawn.

Both models are equipped with powerful engines designed for optimal performance. The E740 comes with a reliable 196cc engine, while the E760 boasts an enhanced 224cc engine, providing even more power for tackling thick grass and challenging terrain. This increased engine capacity not only improves cutting performance but also enhances the longevity of the mower, ensuring that it can handle a variety of conditions over time.

Another noteworthy technology featured in both the E740 and E760 is the advanced mulching capability. Mulching allows grass clippings to be finely chopped and redistributed back onto the lawn, providing essential nutrients to the soil. This eco-friendly feature not only promotes a healthier lawn but also eliminates the need for bagging clippings, making lawn maintenance more convenient.

User comfort is also a primary consideration in the design of these mowers. Both the E740 and E760 feature ergonomic handles that are adjustable, allowing users to customize their mowing experience for maximum comfort. The models also include easy-to-use height adjustment systems, enabling operators to choose from multiple cutting heights with just a simple lever move.

In terms of maneuverability, both mowers are designed for ease of use. They feature robust wheels that provide excellent traction on various surfaces, making it easier to navigate around obstacles and uneven terrain. Additionally, the lightweight design of these mowers means that they can be easily transported and stored.

Overall, the MTD E740 and E760 combine power, precision, and convenience, making them excellent choices for homeowners looking to maintain a well-groomed lawn with minimal effort. Their blend of advanced technologies and user-friendly features ensures that mowing can be a more enjoyable and efficient task.
Top Page Image Contents