MTD E740, E760 manual Lubrication

Page 14

SECTION 9: LUBRICATION

WARNING: Disconnect the spark plug wire and ground against the

engine before performing any lubrication or maintenance.

ENGINE

Refer to engine manual for all engine lubrication instructions.

WARNING: When following instruc- tions in separate engine manual for draining oil, be sure to protect frame to avoid oil dripping onto transmission parts.

AXLE BEARINGS

Oil or spray lubricant into axle bearings at the housing at least once a season.

CHUTE CRANK

The gear on the end of the chute crank should be greased with multi-purpose automotive grease once a season.

AUGER SHAFT

At least once a season, remove shear bolts on auger shaft. Oil or spray lubricant inside shaft. See figure 18. Also lubricate the auger bearings at least once a season.

Shear Bolts

Bearings

Figure 18

SPROCKET SHAFT

Lubricate the sprocket shaft with good all-weather multi-purpose light grease at least once a season or after every 25 hours of operation. Refer to figure 22.

IMPORTANT: Keep all grease and oil off of the rubber friction wheel and aluminum drive plate.

DRIVE AND SHIFTING MECHANISM

At least once a season or after every 25 hours of operation, remove rear cover. Lubricate any chains, sprockets, gears, bearings, shafts, and shifting mechanism at least once a season. Use engine oil or a spray lubricant. Avoid getting oil on rubber friction wheel and aluminum drive plate. Refer to figure 16.

TRACTION DRIVE/AUGER CLUTCH LOCK

The cams on the ends of the control rods which interlock the traction drive and auger drive clutches must be lubricated at least once a season or every twenty-five hours of operation. The cams can be accessed beneath the handle panel. Use a multi- purpose automotive grease.

GEAR CASE

The gear case is lubricated with grease at the factory and does not require checking. If disassembled for any reason, lubricate with 2 ounces of Shell Alvania grease EPR00, part number 737-0168. Before reassembling, remove old sealant and apply “Loctite 5699” or equivalent.

IMPORTANT: Do not overfill the gear case. Dam- age to the seals could result. Be sure the vent plug is free of grease in order to relieve pressure.

14

Image 14
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Safety labels found on your snow throwerFinding Your Model Number Calling Customer SupportContents of Hardware Pack Unpacking Assembly InstructionsAttaching the Handle Assembly Hardware B Attaching the Chute AssemblyAttaching the Chute Crank Hardware CAttaching the Track Controls Attaching the Shift RODAttaching the Clutch Cables Hardware DFinal Adjustments Left and Right Track Controls ControlsAuger Drive Clutch Track Lock LeverTo Start Engine OperationGAS and OIL FILL-UP Ignition Key Starter Choke Handle Primer ThrottleTo Engage Augers To Stop EngineTo Engage Drive Operating TipsAdjustments Lubrication Drive Belt MaintenanceAuger Belts Disc Changing the Friction Wheel RubberFriction Drive BeltOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionGear Assembly Handle Assembly Handle Assembly Blower Housing 26’’ Track and Frame Track and Frame Description Qty Engine and V-Belts Page MANUFACTURER’S Limited Warranty for

E760, E740 specifications

The MTD E740 and E760 represent a significant advancement in outdoor power equipment, particularly in the realm of lawn care and maintenance. Both models are designed to cater to the needs of homeowners and professionals alike, providing them with reliable, efficient, and user-friendly mowing solutions.

One of the main features of the MTD E740 and E760 is their robust 21-inch steel cutting deck. This durable construction ensures that the mower can withstand the rigors of frequent use, while also delivering a precise cutting performance. The wide cutting deck allows for efficient mowing of larger lawns, reducing the time and effort required to achieve a pristine lawn.

Both models are equipped with powerful engines designed for optimal performance. The E740 comes with a reliable 196cc engine, while the E760 boasts an enhanced 224cc engine, providing even more power for tackling thick grass and challenging terrain. This increased engine capacity not only improves cutting performance but also enhances the longevity of the mower, ensuring that it can handle a variety of conditions over time.

Another noteworthy technology featured in both the E740 and E760 is the advanced mulching capability. Mulching allows grass clippings to be finely chopped and redistributed back onto the lawn, providing essential nutrients to the soil. This eco-friendly feature not only promotes a healthier lawn but also eliminates the need for bagging clippings, making lawn maintenance more convenient.

User comfort is also a primary consideration in the design of these mowers. Both the E740 and E760 feature ergonomic handles that are adjustable, allowing users to customize their mowing experience for maximum comfort. The models also include easy-to-use height adjustment systems, enabling operators to choose from multiple cutting heights with just a simple lever move.

In terms of maneuverability, both mowers are designed for ease of use. They feature robust wheels that provide excellent traction on various surfaces, making it easier to navigate around obstacles and uneven terrain. Additionally, the lightweight design of these mowers means that they can be easily transported and stored.

Overall, the MTD E740 and E760 combine power, precision, and convenience, making them excellent choices for homeowners looking to maintain a well-groomed lawn with minimal effort. Their blend of advanced technologies and user-friendly features ensures that mowing can be a more enjoyable and efficient task.