Final Adjustments

4.Attach track control cable to track control handle by inserting cable ball into slot on track control handle. Pull cable down and up until it snaps into front of track control handle. Repeat on other side.

5.Secure the track control cables to the inside of the lower handle using the cable ties provided. Pull the cable ties tight, and trim the excess ends of the cable ties. See figure 12.

Track Cable

Handle

Cable Tie

Shift

Arm

Assembly

Figure 12

Auger Drive Clutch

To check the adjustment of the auger drive clutch, push forward on the left hand clutch grip (depress the rubber bumper). There should be slack in the cable. Release the clutch grip. The cable should be straight. Make certain you can depress the auger drive clutch grip against the left handle completely.

If necessary, loosen the hex jam nut and thread the cable in (for less slack) or out (for more slack) as necessary. Refer to figure 10. Recheck the adjustment. Tighten the hex jam nut against the cable when correct adjustment is reached.

Traction Drive Clutch and Shift Lever Adjustment To check the adjustment of the traction drive clutch and shift lever, move the track lock lever to the transport position (see figure 15) and the shift lever all the way forward to sixth (6) position. With the traction drive clutch released, push the snow thrower forward to check that the tracks turn.

NOTE: It may be necessary to “rock” the snow thrower backward, then forward, to start the tracks turning.

Engage the traction drive clutch and push the snow thrower. The tracks should not turn. Release the trac- tion drive clutch and make sure the tracks again turn.

Move the shift lever back to the fast reverse position, then all the way forward again. There should be no resistance in movement of shift lever.

If you have resistance when moving the shift lever or you are unable to turn the tracks by pushing the snow thrower, loosen the lock nut on the traction drive cable and unthread the cable one turn. If you are able to turn the tracks when you engage the traction drive clutch grip, loosen the lock nut on the traction drive cable and thread the cable in one turn. Recheck and repeat adjustment as necessary. Tighten the lock nut to secure the cable when correct adjustment is reached.

NOTE: If you are uncertain that you have reached the correct adjustment, refer to the Adjustment section on page 13.

Skid Shoe Adjustment

The space between the shave plate and the ground can be adjusted. For close snow removal, place skid shoes in the low position. Use middle or high position when area to be cleared is uneven. See figure 13.

Adjust skid shoes by loosening the four hex nuts and carriage bolts and moving skid shoes to desired position. Make certain the entire bottom surface of skid shoe is against the ground to avoid uneven wear on the skid shoes. Retighten nuts and bolts securely.

It is not recommended that you operate this snow thrower on gravel as loose gravel can be easily picked up and thrown by the auger causing an injury or damage to the snow thrower. If you do wish to use the snow thrower on gravel, refer to “Track Lock Lever” instructions in the Control section.

Low Position

SkidHigh Position

Shoe

Hex Nuts

Carriage Bolts

Figure 13

E760, E740 specifications

The MTD E740 and E760 represent a significant advancement in outdoor power equipment, particularly in the realm of lawn care and maintenance. Both models are designed to cater to the needs of homeowners and professionals alike, providing them with reliable, efficient, and user-friendly mowing solutions.

One of the main features of the MTD E740 and E760 is their robust 21-inch steel cutting deck. This durable construction ensures that the mower can withstand the rigors of frequent use, while also delivering a precise cutting performance. The wide cutting deck allows for efficient mowing of larger lawns, reducing the time and effort required to achieve a pristine lawn.

Both models are equipped with powerful engines designed for optimal performance. The E740 comes with a reliable 196cc engine, while the E760 boasts an enhanced 224cc engine, providing even more power for tackling thick grass and challenging terrain. This increased engine capacity not only improves cutting performance but also enhances the longevity of the mower, ensuring that it can handle a variety of conditions over time.

Another noteworthy technology featured in both the E740 and E760 is the advanced mulching capability. Mulching allows grass clippings to be finely chopped and redistributed back onto the lawn, providing essential nutrients to the soil. This eco-friendly feature not only promotes a healthier lawn but also eliminates the need for bagging clippings, making lawn maintenance more convenient.

User comfort is also a primary consideration in the design of these mowers. Both the E740 and E760 feature ergonomic handles that are adjustable, allowing users to customize their mowing experience for maximum comfort. The models also include easy-to-use height adjustment systems, enabling operators to choose from multiple cutting heights with just a simple lever move.

In terms of maneuverability, both mowers are designed for ease of use. They feature robust wheels that provide excellent traction on various surfaces, making it easier to navigate around obstacles and uneven terrain. Additionally, the lightweight design of these mowers means that they can be easily transported and stored.

Overall, the MTD E740 and E760 combine power, precision, and convenience, making them excellent choices for homeowners looking to maintain a well-groomed lawn with minimal effort. Their blend of advanced technologies and user-friendly features ensures that mowing can be a more enjoyable and efficient task.