MTD E740, E760 manual Important Safe Operation Practices, Training, Preparation

Page 2

SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR SNOW THROWER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL- HEED ITS WARNING.

WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: Your snow thrower was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. If you violate any of these rules, you may cause serious injury to yourself or others.

1. TRAINING

Read this operator's manual carefully in its entirety before attempting to assemble or operate this machine. Be completely familiar with the controls and the proper use of this machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Never allow children under 14 years old to operate a snow thrower. Children 14 years old and over should only operate snow thrower under close parental supervision. Only persons well acquainted with these rules of safe operation should be allowed to use your snow thrower.

No one should operate this unit while intoxicated or while taking medication that impairs the senses or reactions.

Keep the area of operation clear of all persons, especially small children and pets.

Exercise caution to avoid slipping or falling, especially when operating in reverse.

2.PREPARATION

Thoroughly inspect the area where the equipment is to be used and remove all door mats, sleds, boards, wires and other foreign objects.

Disengage all clutches and shift into neutral before starting engine.

Do not operate equipment without wearing adequate winter outer garments. Do not wear jewelry, long scarfs or other loose clothing which could become entangled in moving parts. Wear footwear which will improve footing on slippery surfaces.

Before working with gasoline, extinguish all cigarettes and other sources of ignition. Check the fuel before starting the engine. Gasoline is an extremely flammable fuel. Do not fill the gasoline tank indoors, while the engine is running, or until engine has been allowed to cool at least two minutes. Replace gasoline cap securely and wipe off any spilled gasoline before starting the engine as it may cause a fire or explosion.

Use a grounded three wire plug-in for all units with electric drive motors or electric starting motors.

Adjust collector housing height to clear gravel or crushed rock surface.

Never attempt to make any adjustments while engine is running (except where specifically recommended by manufacturer).

Let engine and machine adjust to outdoor temperature before starting to clear snow.

Always wear safety glasses or eye shields during operation or while performing an adjustment or repair, to protect eyes from foreign objects that may be thrown from the machine in any direction.

3.OPERATION

Do not put hands or feet near or under rotating parts. Keep clear of discharge opening and auger at all times.

Exercise extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic. Do not carry passengers.

After striking a foreign object, stop the engine, remove wire from spark plug, and thoroughly inspect the snow thrower for any damage. Repair the damage before restarting and operating the snow thrower.

2

Image 2
Contents Important Read Safety Rules and Instructions Carefully MTD Products INC. P.O. BOX 368022 CLEVELAND, OhioPreparation Important Safe Operation PracticesTraining OperationMaintenance and Storage Safety labels found on your snow throwerFinding Your Model Number Calling Customer SupportContents of Hardware Pack Unpacking Assembly InstructionsAttaching the Handle Assembly Hardware B Attaching the Chute AssemblyAttaching the Chute Crank Hardware CAttaching the Track Controls Attaching the Shift RODAttaching the Clutch Cables Hardware DFinal Adjustments Left and Right Track Controls ControlsAuger Drive Clutch Track Lock LeverTo Start Engine OperationGAS and OIL FILL-UP Ignition Key Starter Choke Handle Primer ThrottleTo Engage Augers To Stop EngineTo Engage Drive Operating TipsAdjustments Lubrication Drive Belt MaintenanceAuger Belts Disc Changing the Friction Wheel RubberFriction Drive BeltOFF-SEASON Storage Trouble Shooting Guide Trouble Possible Causes Corrective ActionGear Assembly Handle Assembly Handle Assembly Blower Housing 26’’ Track and Frame Track and Frame Description Qty Engine and V-Belts Page MANUFACTURER’S Limited Warranty for

E760, E740 specifications

The MTD E740 and E760 represent a significant advancement in outdoor power equipment, particularly in the realm of lawn care and maintenance. Both models are designed to cater to the needs of homeowners and professionals alike, providing them with reliable, efficient, and user-friendly mowing solutions.

One of the main features of the MTD E740 and E760 is their robust 21-inch steel cutting deck. This durable construction ensures that the mower can withstand the rigors of frequent use, while also delivering a precise cutting performance. The wide cutting deck allows for efficient mowing of larger lawns, reducing the time and effort required to achieve a pristine lawn.

Both models are equipped with powerful engines designed for optimal performance. The E740 comes with a reliable 196cc engine, while the E760 boasts an enhanced 224cc engine, providing even more power for tackling thick grass and challenging terrain. This increased engine capacity not only improves cutting performance but also enhances the longevity of the mower, ensuring that it can handle a variety of conditions over time.

Another noteworthy technology featured in both the E740 and E760 is the advanced mulching capability. Mulching allows grass clippings to be finely chopped and redistributed back onto the lawn, providing essential nutrients to the soil. This eco-friendly feature not only promotes a healthier lawn but also eliminates the need for bagging clippings, making lawn maintenance more convenient.

User comfort is also a primary consideration in the design of these mowers. Both the E740 and E760 feature ergonomic handles that are adjustable, allowing users to customize their mowing experience for maximum comfort. The models also include easy-to-use height adjustment systems, enabling operators to choose from multiple cutting heights with just a simple lever move.

In terms of maneuverability, both mowers are designed for ease of use. They feature robust wheels that provide excellent traction on various surfaces, making it easier to navigate around obstacles and uneven terrain. Additionally, the lightweight design of these mowers means that they can be easily transported and stored.

Overall, the MTD E740 and E760 combine power, precision, and convenience, making them excellent choices for homeowners looking to maintain a well-groomed lawn with minimal effort. Their blend of advanced technologies and user-friendly features ensures that mowing can be a more enjoyable and efficient task.