Poulan 96192001904 Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 16

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or adjustments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot contact plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deflector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deflector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 22)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt and spacer. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

The impeller is secured to the impeller shaft with two (2) capscrew/shear bolts and hex nuts. Should a foreign object or ice become lodged in the impeller, the capscrews are designed to break, preventing damage to any other com- ponents. If impeller does not turn when auger control lever is engaged, check to see if the capscrews have sheared. To replace the capscrew/shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Remove safety ignition key and disconnect spark plug wire from spark plug. Place wire where it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Insert safety ignition key and reconnect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

SPACER

 

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 22

TO REMOVE BELT COVER (See Fig. 23)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

FRAME

BELT COVER

SCREWS

FIG. 23

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Chute Deflector Remote Control Parts Packed Separately in CartonAssembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotator Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerPrimer Ignition KEYRecoil auxiliary starter handle used for starting engine Meets A.N.S.I. Safety RequirementsDrive speed control lever used to select forward or HOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig Power Steering Operation See FigTo Adjust Skid Plates See Fig To Throw Snow See FigBefore Starting the Engine Scraper BAR See FigCheck Engine OIL Level See Fig ADD Gasoline See FigSnow Throwing Tips To Start EngineBefore Stopping If Recoil Starter has FrozenMaintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig To Remove Wheels See FigStorage OtherTroubleshooting Auger Housing KEY Part DescriptionScrapper BAR Auger BearingAuger Assembly 30 LH Auger Assembly 30 RHSkid Plate LH Skid Plate RHExploded Gearbox Assembly 178675X008 Corner Bracket Clean OUT ToolBearing Impeller PulleyWeight BAR 181160X479 Drift Cutter BARPlastic Washer WasherDeflector Control Assembly Chute WeldmentDeflector Weldment Deflector SealKEY Part Repair Parts Snow Thrower Model PP11530ES Handles Loop Handle LH Loop Handle RHLower Tube Pivot SupportRepair Parts SpacerKnob RED Handle KnobCarriage Bolt 5/16−18 X 155377 NUT 5/16−18 169675 Axle Shaft DriveSprocket Repair Parts Snow Thrower Model PP11530ES Drive Speed Selector Assembly Drive Plate AssemblyEND Plate Bottom PANFrame ENGINE, TECEngine Mount Plate Traction Belt Belt CoverImpeller Belt Repair Parts Snow Thrower Model PP11530ES Wheels Wheel Assembly LH196752X421 196753X421Cover Wheel Driver Retainer RingWheel Lobe Clutch SlideRepair Parts Snow Thrower Model PP11530ES BAG of Parts Safety Ignition KEYWrench Shear Bolt KITRepair Parts Snow Thrower Model PP11530ES Decals Limited Warranty

96192001904, 421895 specifications

The Poulan 421895,96192001904 is a powerful chainsaw designed for both residential and professional use. Known for its robust construction and cutting efficiency, this model is widely recognized among tree care professionals and homeowners. It provides an ideal balance of power, ease of use, and durability, making it an essential tool for various cutting tasks, from trimming branches to felling trees.

One of the main features of the Poulan 421895 is its engine performance. It typically comes equipped with a reliable two-stroke engine that delivers impressive horsepower, ensuring efficient cutting capability for a variety of applications. The engine is designed for easy starting, which minimizes user frustration and enhances productivity. Additionally, the engine is built with lower emissions technology, aligning with environmental standards while reducing the carbon footprint.

The design of the Poulan 421895 includes an ergonomic handle that increases comfort during extended use. This feature is particularly beneficial for professionals who may spend long hours operating the tool. The chainsaw also includes anti-vibration technology, which helps reduce fatigue and improve control, making it easier to maneuver during cutting tasks.

Safety is a paramount concern in chainsaw operation, and the Poulan 421895 addresses this through several built-in safety features. It is equipped with a chain brake that stops the chain quickly in case of kickback, providing an added layer of protection for the user. Furthermore, the chainsaw incorporates a safety lock that prevents accidental starting, ensuring that users can operate the tool with peace of mind.

User maintenance is also a key focus of the Poulan 421895. The chainsaw features an automatic oiling system that keeps the chain lubricated during operation, prolonging the life of both the chain and the guide bar. This system reduces the need for frequent manual maintenance, allowing users to focus more on their work rather than upkeep.

In conclusion, the Poulan 421895,96192001904 is a versatile and efficient chainsaw that meets the needs of various users, from weekend warriors to seasoned professionals. With its powerful engine, ergonomic design, safety features, and low maintenance requirements, it stands out as a reliable choice for anyone in need of a dependable cutting tool. Whether tackling yard work or larger tree care projects, this chainsaw is built to deliver consistent performance.
Top Page Image Contents