Poulan 96194000602, 418984 owner manual Table of Contents

Page 3

6.When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the en- gine.

7.Do not run the engine indoors, except when starting the engine and for transporting the snow thrower in or out of the building. Open the outside doors; exhaust fumes are dangerous.

8.Exercise extreme caution when operating on slopes.

9.Never operate the snow thrower without proper guards, and other safety protective devices in place and work- ing.

10.Never direct the discharge toward people or areas where property damage can occur. Keep children and others away.

11.Do not overload the machine capacity by attempting to clear snow at too fast a rate.

12.Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when operating in reverse.

13.Disengage power to the collector/impeller when snow thrower is transported or not in use.

14.Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, or cabs).

15.Never operate the snow thrower without good visibility or light. Always be sure of your footing, and keep a firm hold on the handles. Walk; never run.

16. Never touch a hot engine or muffler.

Clearing a Clogged Discharge Chute

Hand contact with the rotating impeller inside the discharge chute is the most common cause of injury associated with snow throwers. Never use your hand to clean out the dis- charge chute. To clear the chute:

1.SHUT THE ENGINE OFF!

2.Wait 10 seconds to be sure the impeller blades have stopped rotating.

3.Always use a clean-out tool, not your hands.

Maintenance and Storage

1.Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

2.Never store the machine with fuel in the fuel tank inside a building where ignition sources are present such as hot water heaters, space heaters, or clothes dryers. Allow the engine to cool before storing in any enclosure.

3.Always refer to operator’s manual for important details if the snow thrower is to be stored for an extended period.

4.Maintain or replace safety and instruction labels, as necessary.

5.Run the machine a few minutes after throwing snow to prevent freeze-up of the collector/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. Ithasbeendesigned,engineeredandmanufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained technicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TO THE REAR OF THE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts (4,54 Liters)

and Type:

 

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

26 Ounces (0,74 Liters)

 

 

Spark Plug:

Champion RJ19LM

Gap:

0.030" (0,762 mm)

 

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

TABLE OF CONTENTS

SAFETY RULES

2-3

MAINTENANCE SCHEDULE

14

PRODUCT SPECIFICATIONS

3

SERVICE AND ADJUSTMENTS

16-18

CUSTOMER RESPONSIBILITIES

3

STORAGE

18-19

ASSEMBLY / PRE-OPERATION

5-7

TROUBLESHOOTING

20

OPERATION

8-13

REPAIR PARTS

38-51

MAINTENANCE

14-15

3 WARRANTY

52

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Install Chute Deflector Remote Control See FigsCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerMeets A.N.S.I. Safety Requirements Stopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Throw Snow See FigBefore Starting the Engine If Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Storage Other Troubleshooting¡ATENCIÓN! ¡ESTE ALERTO! SU Seguridad Esta Comprometida PreparaciónFuncionamiento Montaje / PRE-OPERACIÓN Tabla DE MateriasPartes Empacadas POR Separado EL LA Caja DE Cartón Desplegar LA Empuñadura Superior Montaje / PRE-OPERACIÓNSacar LA Máquina Quitanieves DEL Cartón Como Preparar SU Máquina QuitanievesMontaje DE LA Biela DE Mando DE LA Tracción Ver Figs yDE Mando DE LA Barrena Ver Figs y Controlar LA Presión DE LOS Neumáticos Familiarícese CON SU Máquina Quitanieves OperaciónCumple CON LOS Requisitos DE Seguridad DE LA A.N.S.I Controlar LA Eyección DE LA Nieve Como Utilizar SU Máquina QuitanievesPararse Funcionamiento DE LA Dirección Ver Fig Lanzar LA Nieve Ver FigUsar LA Herramienta Para Limpiar Ver Fig Moverse Adelante Y Atrás Ver FigControlar EL Nivel DE Aceite DEL Motor Ver Fig Antes DE Poner EN Marcha EL MotorRegular LAS Placas DE Deslizamiento Ver Fig Barra DE Arrastre Ver FigSI EL Arrancador DE Retroceso SE HA Congelado Consejos Para Lanzar LA NievePuesta EN Marcha DEL Motor Antes DE PararMaquina Quitanieves MantenamientoRecomendaciones Generales LubricaciónLimpieza MotorPernos DE Seguridad Ver Fig Servicio Y AdjustesPara Ajustar LA Altura DE Máquina Quitanieves Conducto DeflectorVaciar LA Gasolina DEL Depósito DE Carburante Sustituir LAS Correas Vea FigOtros AlmacenimientoIdentificacion DE Problemas Page KEY Part Description Page 414280 Knob, Lever Repair Parts Snow Thrower Model Number Handles Repair Parts Snow Thrower Model Number 96194000602 Handles Repair Parts Snow Thrower Model Number 96194000602 Drive Repair Parts Snow Thrower Model Number 96194000602 Drive Page 413429X479 KEY Part Description416954 416717X004Repair Parts Snow Thrower Model Number 96194000602 Wheels KEY Part Description Repair Parts Snow Thrower Model Number 96194000602 Decals 406045 181038 Decal, DangerLimited Warranty

96194000602, 418984 specifications

The Poulan 96194000602,418984 is a powerful and versatile chainsaw designed to meet the demands of both professional landscapers and homeowners who require a reliable tool for their cutting needs. This chainsaw is equipped with several innovative features and technologies that set it apart from other models in the market.

At its core, the Poulan 96194000602 is powered by a robust 42cc, 2-cycle engine, which provides ample power for various tasks, from trimming branches to cutting down small trees. The engine is designed to deliver a strong performance while maintaining fuel efficiency, allowing users to work longer without frequent refueling. The incorporation of a gas-powered engine means that this chainsaw can deliver consistent power without the limitations of a battery-operated model.

One of the standout characteristics of this chainsaw is its ergonomic design. The lightweight construction and well-balanced design ensure user comfort, even during extended use. The chainsaw features an easy-to-grip handle, reducing fatigue and allowing for a more controlled cutting experience. Additionally, its anti-vibration technology helps minimize vibrations felt by the user, enhancing comfort and safety.

The Poulan 96194000602 is equipped with a 16-inch bar and chain, making it suitable for a variety of cutting tasks. The chainsaw's chain tensioning system allows for quick and convenient adjustments, ensuring optimal performance and longevity of the chain. The tool-less chain adjustment feature is especially beneficial for users who need to make adjustments quickly in the field.

Safety is also a priority in the design of the Poulan 96194000602. It comes with a built-in chain brake that instantly stops the chain's motion in the event of kickback, providing an added layer of safety to the user. Furthermore, the chainsaw features an automatic oiling system that ensures the chain is adequately lubricated during operation, reducing wear and tear.

In summary, the Poulan 96194000602,418984 chainsaw combines power, comfort, and safety features that make it an excellent choice for both homeowners and professionals alike. Whether you need to tackle yard work or outdoor projects, this chainsaw delivers reliability and performance, ensuring you can get the job done efficiently. With its user-friendly design and advanced technologies, the Poulan chainsaw is a smart investment for anyone in need of a high-quality cutting tool.
Top Page Image Contents