Poulan PP13TEPH30, 416751, 96198000901, PP12TEPH30 owner manual Maintenance

Page 14

MAINTENANCE

GENERAL RECOMMENDATIONS

The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual. Some adjust- ments will need to be made periodically to properly maintain your snow thrower.

At least once a season, check to see if you should make any of the adjustments described in the Service and Ad- justments section of this manual.

•At least once a year, you should replace the spark plug and check belts for wear. A new spark plug will help your engine run better and last longer.

•Follow the maintenance schedule in this manual.

NOTE: Use only Original Equipment Manufacturer (OEM) parts to service this unit. Failure to do so can cause the unit to malfunction and pose a risk of injury to the operator.

BEFORE EACH USE

1.Check engine oil level.

2.Check for loose fasteners.

3.Check controls to be sure they are functioning properly.

LUBRICATION

Keep your snow thrower well lubricated (See “LUBRICATION CHART”).

LUBRICATION CHART

SAE 5W-30 Motor Oil

See “ENGINE” in

Maintenance section

General

Purpose

Grease

Engine oil

Auger grease fittings

Pivot points

SNOW THROWER

Always observe the safety rules when performing any maintenance.

TIRES

•Maintain proper air pressure in both tires (14–17 P.S.I. / 19-24.5 N-m).

•Keep tires free of gasoline and oil, which can harm rubber.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigInstall Chute Deflector Remote Control See Figs Primer OperationKnow Your Snow Thrower Ignition KEYDrive speed control lever used to select forward or Meets A.N.S.I. Safety RequirementsDeflector remote control lever used to change Discharge chute control lever used to changeHOW to USE Your Snow Thrower StoppingTo Adjust Skid Plates See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Move Forward and Backward See FigScraper BAR See Fig Before Starting the EngineCheck Engine OIL Level See Fig To USE Drift Cutters See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenMaintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting 3056 2220 413608X479 413609X479Page 414280 Knob, Lever, Black Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Drive Repair Parts Snow Thrower Model PP13TEPH30 Drive Page 405029 40384296198000901 181037 Decal, Danger 416751 416752Limited Warranty

PP12TEPH30, PP13TEPH30, 96198000901, 416751 specifications

The Poulan series, including models like the 416751, PP12TEPH30, 96198000901, and PP13TEPH30, exhibits a blend of power, durability, and versatility tailored for both novice users and seasoned professionals in the outdoor power equipment arena. These models are engineered with a focus on delivering efficient performance for various lawn care and maintenance tasks.

One of the standout features of the Poulan chainsaws is their robust engine technology. The advanced two-stroke engine provides optimal power output while ensuring fuel efficiency. This means users can rely on sustained performance during intensive tasks without frequent refueling interruptions. The lightweight design of these chainsaws adds to their appeal, making them easy to handle and maneuver, reducing user fatigue during prolonged use.

In addition, the Poulan 416751 and similar models boast an automatic chain lubrication system, which ensures that the chain remains well-oiled for smoother operation and enhanced longevity. This feature not only minimizes the wear and tear on the chain but also boosts the overall safety and effectiveness of cutting operations.

The quick-release air filter on these models simplifies maintenance, allowing users to easily access the filter for cleaning and replacement, thereby promoting longer engine life. Furthermore, Poulan emphasizes user comfort with ergonomically designed handles that reduce vibrations, enabling more precise control while reducing physical strain.

Safety is paramount with the inclusion of safety features such as a chain brake, which automatically halts the chain in the event of kickback, protecting the user from potential injuries. Multiple safety mechanisms ensure that these chainsaws can be operated confidently, even by those who may be new to power equipment.

With their impressive combination of technology and design, the Poulan models like PP12TEPH30, 96198000901, and PP13TEPH30 stand out in the market. They are well-suited for a variety of tasks, from trimming branches to felling trees, making them versatile tools for landscaping and forestry work.

In summary, the Poulan chainsaws encapsulate reliability, cutting-edge technology, and user-friendly features, making them an exceptional choice for anyone looking to tackle outdoor projects with ease and efficiency. Their emphasis on power, safety, and ease of maintenance makes these models ideal companions for users seeking performance and convenience.
Top Page Image Contents