Poulan PP12TEPH30 Install Discharge Chute / Chute Rotater Head See Fig, Check Tire Pressure

Page 7

ASSEMBLY / PRE-OPERATION

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotatechute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

 

ROTATER HEAD

CHUTE

ALIGN BEFORE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

INSTALL CHUTE DEFLECTOR REMOTE CONTROL (See Figs. 8 and 9)

1.Install remote cable bracket to discharge chute with 5/16-18 carriage bolt and 5/16-18 locknut as shown. Tighten securely.

2.Install remote cable eyelet to chute deflector with 1/4-20 shoulder bolt, nylon washer and 1/4-20 locknut as shown. Tighten securely.

3.Install spring hooks between hex nuts on chute rotater head and into hole in chute deflector as shown.

1/4-20

SPRING

CHUTE

SHOULDER

DEFLECTOR

BOLT

 

 

HOOK

NYLON

BETWEEN

WASHER

HEX NUTS

1/4-20

ON CHUTE

ROTATER

LOCKNUT

HEAD

 

5/16-18

 

CARRIAGE

 

BOLT

CABLE

 

EYELET

 

REMOTE

 

CABLE

 

BRACKET

 

5/16-18

 

LOCKNUT

 

FIG. 8

CHUTE DEFLECTOR

CONTROL LEVER

FIG. 9

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerDischarge chute control lever used to change Meets A.N.S.I. Safety RequirementsDeflector remote control lever used to change Drive speed control lever used to select forward orStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Adjust Skid Plates See FigTo USE Drift Cutters See Fig Before Starting the EngineCheck Engine OIL Level See Fig Scraper BAR See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting 3056 2220 413609X479 413608X479Page 414280 Knob, Lever, Black Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Drive Repair Parts Snow Thrower Model PP13TEPH30 Drive Page 403842 40502996198000901 416751 416752 181037 Decal, DangerLimited Warranty

PP12TEPH30, PP13TEPH30, 96198000901, 416751 specifications

The Poulan series, including models like the 416751, PP12TEPH30, 96198000901, and PP13TEPH30, exhibits a blend of power, durability, and versatility tailored for both novice users and seasoned professionals in the outdoor power equipment arena. These models are engineered with a focus on delivering efficient performance for various lawn care and maintenance tasks.

One of the standout features of the Poulan chainsaws is their robust engine technology. The advanced two-stroke engine provides optimal power output while ensuring fuel efficiency. This means users can rely on sustained performance during intensive tasks without frequent refueling interruptions. The lightweight design of these chainsaws adds to their appeal, making them easy to handle and maneuver, reducing user fatigue during prolonged use.

In addition, the Poulan 416751 and similar models boast an automatic chain lubrication system, which ensures that the chain remains well-oiled for smoother operation and enhanced longevity. This feature not only minimizes the wear and tear on the chain but also boosts the overall safety and effectiveness of cutting operations.

The quick-release air filter on these models simplifies maintenance, allowing users to easily access the filter for cleaning and replacement, thereby promoting longer engine life. Furthermore, Poulan emphasizes user comfort with ergonomically designed handles that reduce vibrations, enabling more precise control while reducing physical strain.

Safety is paramount with the inclusion of safety features such as a chain brake, which automatically halts the chain in the event of kickback, protecting the user from potential injuries. Multiple safety mechanisms ensure that these chainsaws can be operated confidently, even by those who may be new to power equipment.

With their impressive combination of technology and design, the Poulan models like PP12TEPH30, 96198000901, and PP13TEPH30 stand out in the market. They are well-suited for a variety of tasks, from trimming branches to felling trees, making them versatile tools for landscaping and forestry work.

In summary, the Poulan chainsaws encapsulate reliability, cutting-edge technology, and user-friendly features, making them an exceptional choice for anyone looking to tackle outdoor projects with ease and efficiency. Their emphasis on power, safety, and ease of maintenance makes these models ideal companions for users seeking performance and convenience.
Top Page Image Contents