Poulan PP12TEPH30, 416751, 96198000901, PP13TEPH30 owner manual Troubleshooting

Page 19

TROUBLESHOOTING

See appropriate section in manual unless directed to an authorized service centre/department.

PROBLEM

 

CAUSE

 

CORRECTION

Does not start

1.

Fuel shut-off valve (if so

1.

Turn fuel shut-off valve to OPEN position.

 

 

equipped) in OFF position.

 

 

 

2.

Safety ignition key

2.

Insert safety ignition key.

 

 

is not inserted.

 

 

 

3.

Out of fuel.

3.

Fill fuel tank with fresh, clean gasoline.

 

4.

Throttle in STOP position

4.

Move throttle to FAST position

 

 

(or ON/OFF switch is OFF).

 

(or ON/OFF switch to ON position).

 

5.

Choke in OFF position.

5.

Move to FULL position.

 

6.

Primer not depressed.

6.

Prime as instructed in the Operation section of this manual.

 

7.

Engine is flooded.

7.

Wait a few minutes before restarting, DO NOT prime.

 

8.

Spark plug wire is

8.

Connect wire to spark plug.

 

 

disconnected.

 

 

 

9.

Bad spark plug.

9.

Replace spark plug.

 

10.

Stale fuel.

10.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

11.

Water in fuel.

11.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

 

 

 

 

Loss of power

1.

Spark plug wire loose.

1.

Reconnect spark plug wire.

 

2.

Throwing too much snow.

2.

Reduce speed and width of swath.

 

3.

Fuel tank cap is covered

3.

Remove ice and snow on and around fuel tank cap.

 

 

with ice or snow.

 

 

 

4.

Dirty or clogged muffler.

4.

Clean or replace muffler.

 

 

 

 

 

Engine idles or

1.

Choke is in FULL position.

1.

Move choke to OFF position.

runs roughly

2.

Blockage in fuel line.

2.

Clean fuel line.

 

3.

Stale fuel.

3.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

4.

Water in fuel.

4.

Empty fuel tank & carburetor, refill with fresh, clean gasoline.

 

5.

Carburetor is in need of

5.

Contact an authorized service centre/department.

 

 

adjustment or overhaul.

 

 

 

 

 

 

 

Excessive

1.

Loose parts or damaged

1.

Tighten all fasteners. Replace damaged parts. If vibration

vibration

 

augers or impeller.

 

remains, contact an authorized service centre/department.

 

 

 

 

 

Recoil starter

1.

Frozen recoil starter.

1.

See “IF RECOIL STARTER HAS FROZEN”

is hard to pull

 

 

 

in the Operation section of this manual.

 

 

 

 

 

Loss of traction

1.

Drive belt is worn.

1.

Check / replace drive belt.

drive / slowing

2.

Drive belt is off of pulley.

2.

Check / reinstall drive belt.

of drive speed

3.

Friction drive wheel is worn.

3.

Contact an authorized service centre/department.

 

 

 

 

 

Loss of snow

1.

Auger belt is off of pulley.

1.

Check / reinstall auger belt.

discharge or

2.

Auger belt is worn.

2.

Check / replace auger belt.

slowing of

3.

Clogged discharge chute.

3.

Clean snow chute.

snow discharge

4.

Augers / impeller jammed.

4.

Remove debris or foreign object from augers / impeller.

 

 

 

 

 

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Unfold Upper Handle Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Remove Snow Thrower from CartonInstall Auger Control ROD See Figs Install Traction Drive Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Ignition KEY OperationKnow Your Snow Thrower PrimerDischarge chute control lever used to change Meets A.N.S.I. Safety RequirementsDeflector remote control lever used to change Drive speed control lever used to select forward orStopping HOW to USE Your Snow ThrowerTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigPower Steering Operation See Fig To Adjust Skid Plates See FigTo USE Drift Cutters See Fig Before Starting the EngineCheck Engine OIL Level See Fig Scraper BAR See FigIf Recoil Starter has Frozen Snow Throwing TipsTo Start Engine Before StoppingMaintenance Engine CleaningShear Bolts See Fig Service and AdjustmentsTo Adjust Snow Thrower Height Chute DeflectorTo Replace Belts See Fig Other StorageTroubleshooting 3056 2220 413609X479 413608X479Page 414280 Knob, Lever, Black Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Handles Repair Parts Snow Thrower Model PP13TEPH30 Drive Repair Parts Snow Thrower Model PP13TEPH30 Drive Page 403842 40502996198000901 416751 416752 181037 Decal, DangerLimited Warranty

PP12TEPH30, PP13TEPH30, 96198000901, 416751 specifications

The Poulan series, including models like the 416751, PP12TEPH30, 96198000901, and PP13TEPH30, exhibits a blend of power, durability, and versatility tailored for both novice users and seasoned professionals in the outdoor power equipment arena. These models are engineered with a focus on delivering efficient performance for various lawn care and maintenance tasks.

One of the standout features of the Poulan chainsaws is their robust engine technology. The advanced two-stroke engine provides optimal power output while ensuring fuel efficiency. This means users can rely on sustained performance during intensive tasks without frequent refueling interruptions. The lightweight design of these chainsaws adds to their appeal, making them easy to handle and maneuver, reducing user fatigue during prolonged use.

In addition, the Poulan 416751 and similar models boast an automatic chain lubrication system, which ensures that the chain remains well-oiled for smoother operation and enhanced longevity. This feature not only minimizes the wear and tear on the chain but also boosts the overall safety and effectiveness of cutting operations.

The quick-release air filter on these models simplifies maintenance, allowing users to easily access the filter for cleaning and replacement, thereby promoting longer engine life. Furthermore, Poulan emphasizes user comfort with ergonomically designed handles that reduce vibrations, enabling more precise control while reducing physical strain.

Safety is paramount with the inclusion of safety features such as a chain brake, which automatically halts the chain in the event of kickback, protecting the user from potential injuries. Multiple safety mechanisms ensure that these chainsaws can be operated confidently, even by those who may be new to power equipment.

With their impressive combination of technology and design, the Poulan models like PP12TEPH30, 96198000901, and PP13TEPH30 stand out in the market. They are well-suited for a variety of tasks, from trimming branches to felling trees, making them versatile tools for landscaping and forestry work.

In summary, the Poulan chainsaws encapsulate reliability, cutting-edge technology, and user-friendly features, making them an exceptional choice for anyone looking to tackle outdoor projects with ease and efficiency. Their emphasis on power, safety, and ease of maintenance makes these models ideal companions for users seeking performance and convenience.
Top Page Image Contents