Poulan 961980019 owner manual Snow Throwing Tips, Before Stopping, If Recoil Starter has Frozen

Page 12

OPERATION

WARM START - ELECTRIC STARTER

Follow the steps above, keeping the choke control in the “OFF” position.

COLD START - RECOIL STARTER

1.Insert safety ignition key (packed separately in parts bag) into ignition slot until it clicks. DO NOT turn the key. Keep the extra safety ignition key in a safe place.

2.Place ON / OFF switch in “ON” position.

3.Rotate choke control to “FULL” position.

4.Push the primer four (4) times if the temperature is below 15°F, or two (2) times if temperature is between 15° and 50°F. If temperature is above 50°F, priming is not necessary.

NOTE: Over priming may cause flooding, preventing the engine from starting. If you do flood the engine, wait a few minutes before attempting to start and DO NOT push the primer.

5.Pull recoil starter handle quickly. Do not allow starter rope to snap back.

6.When the engine starts, release the recoil starter handle and slowly move the choke control to the “OFF” posi- tion.

Allow the engine to warm up for a few minutes. Engine will not develop full power until it has reached normal operat- ing temperature.

WARM START - RECOIL STARTER

Follow the steps above, keeping the choke in the “OFF” position. DO NOT push the primer.

BEFORE STOPPING

Run the engine for a few minutes to help dry off any mois- ture on the engine.

IF RECOIL STARTER HAS FROZEN

If the recoil starter has frozen and will not turn the engine, proceed as follows:

1.Grasp the recoil starter handle and slowly pull as much rope out of the starter as possible.

2.Release the recoil starter handle and let it snap back against the starter.

If the engine still fails to start, repeat the above steps or use the electric starter.

SNOW THROWING TIPS

•Go slower in deep, freezing or heavy wet snow. Use the drive speed control, NOT the ON / OFF switch, to adjust speed.

•It is easier and more efficient to remove snow imme- diately after it falls.

•The best time to remove snow is the early morning. At this time the snow is usually dry and has not been ex- posed to the direct sun and warming temperatures.

•Slightly overlap each successive path to ensure all snow will be removed.

•Throw snow downwind whenever possible.

•Adjust the skid plates to proper height for current snow conditions. See “TO ADJUST SKID PLATES” in this section of this manual.

•For extremely heavy snow, reduce the width of snow removal by overlapping previous path and moving slowly.

•Keep engine clean and clear of snow during use. This will help air flow and extend engine life.

•After snow-throwing is completed, allow engine to run for a few minutes to melt snow and ice off the engine.

•Clean the entire snow thrower thoroughly after each use and wipe dry so it is ready for next use.

WARNING: Do not operate snow thrower if weather conditionsimpair vis- ibility. Throwing snow during a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerPrimer Ignition KEYRecoil auxiliary starter handle used for starting Skid PlateHOW to USE Your Snow Thrower StoppingTo USE Choke Control See Fig To Control Snow Discharge See FigsUsing the CLEAN-OUT Tool See Fig To Adjust Skid Plates See FigTo Throw Snow See Fig To Move Forward and Backward See FigBefore Starting the Engine Scraper BARCheck Engine OIL Level See Fig ADD Gasoline See FigSnow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Service Notes   413606X479 155377413607X479 Page 414280 Knob, Lever, Black 1724 KEY Part Description Repair Parts Drive Repair Parts Snow Thrower Model 961980019 96198001901 Drive Page KEY Part Description   KEY Part Description Limited Warranty

961980019 specifications

The Poulan 961980019 is a dependable and robust chainsaw designed for both novice and experienced users seeking an efficient tool for various cutting tasks. Renowned for its reliability and performance, this model is ideal for homeowners, landscapers, and woodworkers alike.

One of the standout features of the Poulan 961980019 is its powerful engine. Equipped with a reliable 42cc two-cycle engine, the chainsaw delivers strong cutting performance and consistent power, making it suitable for slicing through trees, logs, and other tough materials with ease. The engine's design ensures reduced emissions, promoting a more environmentally friendly operation without compromising on power.

The chainsaw features a 16-inch bar, providing a good balance between cutting capacity and maneuverability. This length is perfect for medium-sized tasks, allowing users to make efficient cuts without the weight of larger models. Coupled with a high chain speed, the Poulan 961980019 provides quick and clean cuts, enhancing productivity and efficiency in both home and professional settings.

Another notable characteristic is the chainsaw's lightweight construction. Weighing only 10 lbs, it minimizes user fatigue, making it easy to handle during extended use. The ergonomic design, featuring a comfortable grip and well-placed controls, ensures that users can operate the saw with confidence and ease.

The Poulan 961980019 also incorporates advanced technologies for enhanced safety and convenience. Its automatic chain oiling system provides continuous lubrication, which extends the life of the chain and bar while reducing wear and tear. Additionally, it includes a chain brake feature that helps protect users from kickback accidents, enhancing safety during operation.

The chainsaw is designed for easy maintenance, featuring a tool-less chain adjustment that allows users to make quick adjustments on the go. This means less downtime and more efficient work sessions. Its sturdy construction ensures durability, even in demanding conditions, making it a trusted companion for a wide array of forestry tasks.

Overall, the Poulan 961980019 stands out in the market for its blend of power, durability, and user-friendly design. Whether you're tackling yard work or professional projects, this chainsaw provides a versatile and efficient solution for all your cutting needs.
Top Page Image Contents