Poulan 961980019 Assembly / PRE-OPERATION, Remove Snow Thrower from Carton, Unfold Upper Handle

Page 5

ASSEMBLY / PRE-OPERATION

Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiarize you with the unit, which will assist you in assembly, operation and maintenance of the product.

Your new snow thrower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to complete the assembly have been placed in the parts bag. To ensure safe and proper operation of your snow thrower, all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to ensure proper tightness.

REMOVE SNOW THROWER FROM CARTON

1.Remove all accessible loose parts and parts boxes from carton.

2.Cut down all four corners of carton and lay panels flat.

3.Remove the two (2) screws securing the auger housing to the pallet.

4.Remove all packing materials except plastic tie holding speed control rod to lower handle.

5.Remove the two (2) plastic ties securing the upper handle to the pallet.

6.Remove snow thrower from carton and check carton thoroughly for additional loose parts.

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 8)

A toolbox is provided on your snow thrower. The toolbox is located on top of the belt cover. Store the extra shear bolts, nuts and multi-wrench provided in parts bag in the toolbox.

NOTE: The multi-wrench may be used for assembly of the chute rotator head to snow thrower and making adjustments to the skid plates.

SPEED CONTROL ROD

RETAINER

SPRING

SPEED SPEED

CONTROL CONTROL

BRACKET LEVER

FIG. 2

INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4)

The traction drive control rod has the long loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into pivot bracket with loop opening down as shown.

UNFOLD UPPER HANDLE

1.Raise upper handle to the operating position and tighten handle knobs securely.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1.Remove plastic tie securing rod to lower handle.

2.Insert rod into speed control bracket and secure with retainer spring.

SPEED

 

CONTROL

 

ROD

 

PLASTIC TIE

 

UPPER

 

HANDLE

 

HANDLE

 

KNOB

 

LOWER

 

HANDLE

 

FIG. 1

5

2.With top end of rod positioned under left side of control panel, push rod down and insert top end of rod into hole in drive control bracket. Secure with retainer spring.

TRACTION DRIVE

CONTROL ROD

RUBBER

SLEEVE

LOOP

OPENING

DOWN

PIVOT

BRACKET

FIG. 3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Snow Thrower Model NumberSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton HOW to SET UP Your Snow Thrower Assembly / PRE-OPERATIONRemove Snow Thrower from Carton Unfold Upper HandleCheck Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotater Head See Fig Know Your Snow Thrower OperationPrimer Ignition KEYSkid Plate Recoil auxiliary starter handle used for startingStopping HOW to USE Your Snow ThrowerTo USE Choke Control See Fig To Control Snow Discharge See FigsTo Adjust Skid Plates See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig To Move Forward and Backward See FigScraper BAR Before Starting the EngineCheck Engine OIL Level See Fig ADD Gasoline See FigIf Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Maintenance Engine CleaningTo Adjust Snow Thrower Height Service and AdjustmentsChute Deflector Shear Bolts See FigTo Replace Belts See Fig Other StorageTroubleshooting Service Notes   413607X479 413606X479155377 Page 414280 Knob, Lever, Black 1724 KEY Part Description Repair Parts Drive Repair Parts Snow Thrower Model 961980019 96198001901 Drive Page KEY Part Description   KEY Part Description Limited Warranty

961980019 specifications

The Poulan 961980019 is a dependable and robust chainsaw designed for both novice and experienced users seeking an efficient tool for various cutting tasks. Renowned for its reliability and performance, this model is ideal for homeowners, landscapers, and woodworkers alike.

One of the standout features of the Poulan 961980019 is its powerful engine. Equipped with a reliable 42cc two-cycle engine, the chainsaw delivers strong cutting performance and consistent power, making it suitable for slicing through trees, logs, and other tough materials with ease. The engine's design ensures reduced emissions, promoting a more environmentally friendly operation without compromising on power.

The chainsaw features a 16-inch bar, providing a good balance between cutting capacity and maneuverability. This length is perfect for medium-sized tasks, allowing users to make efficient cuts without the weight of larger models. Coupled with a high chain speed, the Poulan 961980019 provides quick and clean cuts, enhancing productivity and efficiency in both home and professional settings.

Another notable characteristic is the chainsaw's lightweight construction. Weighing only 10 lbs, it minimizes user fatigue, making it easy to handle during extended use. The ergonomic design, featuring a comfortable grip and well-placed controls, ensures that users can operate the saw with confidence and ease.

The Poulan 961980019 also incorporates advanced technologies for enhanced safety and convenience. Its automatic chain oiling system provides continuous lubrication, which extends the life of the chain and bar while reducing wear and tear. Additionally, it includes a chain brake feature that helps protect users from kickback accidents, enhancing safety during operation.

The chainsaw is designed for easy maintenance, featuring a tool-less chain adjustment that allows users to make quick adjustments on the go. This means less downtime and more efficient work sessions. Its sturdy construction ensures durability, even in demanding conditions, making it a trusted companion for a wide array of forestry tasks.

Overall, the Poulan 961980019 stands out in the market for its blend of power, durability, and user-friendly design. Whether you're tackling yard work or professional projects, this chainsaw provides a versatile and efficient solution for all your cutting needs.
Top Page Image Contents