Simplicity L9528EX, E95288E, L11532E, L10530EX, E105308E Operation, Checks Before Each START-UP

Page 15

Operation

GENERAL OPERATION

CHECKS BEFORE EACH START-UP

1.Make sure all safety guards are in place and all nuts, bolts and clips are secure.

2.Check to make sure that the clean-out is attached to the auger housing. Do not operate the machine with- out the clean-out tool properly stored on the auger housing.

3.Check the engine oil level. See your engine owner’s manual for procedure and specifications.

4.Check to make sure spark plug wire is attached and spark plug is tightened securely. If necessary, torque spark plug to 15 ft. lbs.

5.Check the fuel supply. Fill the tank no closer than 1/4 to 1/2 inch of top of tank to provide space for expan- sion. See your engine owner’s manual for fuel recom- mendations.

6.Check the scraper bar to make sure it is set at the desired height. Adjust the skid shoes if necessary.

7.Check the drive control (B, Figure 2), and auger con- trol (C) for proper operation. If adjustment is required, see the service section for procedures.

8.Check the chute direction control (D, Figure 2) for proper operation. The discharge chute should rotate freely in both directions. See the service section for adjustment procedures and troubleshooting.

9.Check the chute deflector (E, Figure 2) for proper operation. The deflector should pivot freely up and down.

10.Position the chute at the desired starting direction and set the deflector at the desired angle.

11.Check the speed selector (A, Figure 2) for smooth operation. The control must move freely into each speed position gate and remain in position when released. If the speed selector does not move freely into all forward and reverse speed positions, contact your local authorized dealer for assistance.

WARNING

This unit is a “two-stage” snowthrower.

The first stage is the auger, which feeds the snow back into the impeller housing. The second stage is the impeller, which throws the snow out the discharge chute. If bodily contact is made with the auger or impeller when they are rotating, severe personal injury will occur.

To avoid injury, keep others and yourself away from the auger and the discharge chute whenever the engine is running. Read and follow all of the safety rules and warnings in this manual.

DANGER

Do not clean out discharge chute with hands. Contact with moving parts inside chute will cause serious injury. Use clean out tool provided with machine. Use the following procedure to remove objects or clear the chute:

1.Stop the engine. Remove the key

2.Wait 10 seconds to be sure the auger/impeller blades have stopped rotating.

3.Always use the clean-out tool. DO NOT use your hands.

WARNING

For your safety, operation on slopes should be in an up and down direction only. If it becomes necessary to move across the face of a slope, use caution and do not blow snow. Be very careful when changing direction on a slope.

Proper winter footwear is recommended for the operator to help prevent slipping. Never attempt to clean snow from excessively steep slopes. The maximum slope for any operation is 17.7% (10º).

WARNING

Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is hot or running. Always move outdoors to fill the tank. Keep snowthrower and gasoline away from open flame or spark.

12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Operator’s Manuals Print Vendor InstructionsPage Models OPERATOR’S ManualTable of Contents Safety Rules & Information Operating Safety Moving Parts Safety Rules and InformationTraining Safety Rules & InformationChildren Safety RulesDecals DecalsNorth American Model Decals ALL Model Decals CE Model DecalsChute Release Shift Decal Safety Icons Safety IconsCE Models Identification NumbersCE Identification TAG Markings North AmericanFeatures, Controls, & Operation Control LocationsSpeed Selector Features & Controls Checks Before Each START-UP OperationStarting Controls Electric StartManual Start Will Continue until the Free-Hand Control is released Starting the EngineOperating the Snowthrower Clearing a Clogged Discharge ChuteScraper BAR & Skid Shoes Ground Speed SelectorEngine Speed DeflectorFull Traction Easy Turn TractionEasy Turn Freewheeling Traction Drive Lock Storage After Each USEAuger Gear Case Lubrication Regular MaintenanceMaintenance Schedule Checking Tire PressureLubrication Regular MaintenanceLubricating the Auger Shaft & Assembly Check / Lubricate FREE-HAND LinkageLubricate as shown in figure Page Troubleshooting Troubleshooting, Adjustments, ServicePoor traction Auger does not stop when augerAuger rotates, but snow is not Thrown far enoughInitial Adjustment AdjustmentsAuger Drive Adjustment Traction Drive Cable Adjustment16 10.95cm Run-In AdjustmentTraction Drive Belt Easy Turn Cable AdjustmentBelt Adjustment Auger Drive Belt3.18mm Adjustments & ServiceShear PIN Replacement Belt Guide AdjustmentBelt Replacement ServiceSpout Rotator Rod Special Nut Cover Hair Pin Traction Belt Change Swing Plate Alignment Tabs Specifications EngineChassis Technical Manuals Parts & AccessoriesReplacement Parts Maintenance ItemsO D U C T S

E115328E, L11532E, L10530EX, E95288E, 105308E specifications

The Simplicity L8526EX, L9528EX, 115328E, L9528E, and 95288E represent a line of advanced lawn mowers designed to combine efficiency with user-friendly features. Each model is tailored to meet diverse mowing needs, making them ideal for both residential and commercial applications.

The Simplicity L8526EX is renowned for its robust construction and exceptional cutting power. It features a powerful engine that ensures consistent performance even in challenging mowing conditions. One of its standout characteristics is the unique Mow More technology, which allows for smooth maneuverability and precise cutting, making it suitable for complex lawns with varying terrain. Additionally, its adjustable cutting heights provide flexibility, allowing users to select the perfect length for their grass.

The L9528EX is a versatile model designed for larger properties. It boasts a wider cutting deck, optimizing mowing time while reducing the number of passes required. The engine delivers high torque and speed, ensuring that grass is cut quickly and efficiently. This model also incorporates a sophisticated bagging system that efficiently collects clippings, preventing them from littering the lawn and providing a cleaner cut.

The 115328E model stands out for its ergonomic design and user-friendly controls. It features an innovative handle system that reduces vibration, enhancing comfort during prolonged use. Its easy-start technology ensures that users can get the mower running with minimal effort. With a robust frame and enhanced stability features, this model is built to last while offering superior cutting performance.

The L9528E model combines economy with high performance. It is lightweight yet durable, allowing for easy operation without compromising on power. The advanced mulching capability of this mower breaks down clippings finely, returning valuable nutrients back to the soil. This not only improves the health of the lawn but also minimizes the environmental impact.

Lastly, the 95288E is equipped with cutting-edge technologies for an ultimate mowing experience. It includes a digital display that provides real-time information on battery life and performance status. The easy-adjust mowing height system allows users to make quick adjustments on-the-fly. Additionally, it features a quiet operation mode ideal for residential areas, ensuring minimal disruption.

In summary, the Simplicity L8526EX, L9528EX, 115328E, L9528E, and 95288E showcase a commitment to quality, performance, and user satisfaction. Each model incorporates innovative features and technology that cater to a range of mowing requirements, making them valuable additions to any lawn care routine.
Top Page Image Contents