Simplicity E105308E, L9528EX, E95288E, L11532E, L10530EX, L8526EX Specifications, Engine, Chassis

Page 34

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Power Ratings

The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max-

imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE:

8.5 HP* Briggs & Stratton

Make

Briggs & Stratton

Model

Power Built

Horsepower

8.5 @ 3600 rpm

Displacement

15.2 Cu. in (249 cc)

Oil Capacity

19 oz. (,56 L)

CHASSIS:

Wheels

 

- 8526, 9528,

Tire Size: 15 x 5

 

Inflation Pressure: 20 psi (1,37 bar)

- 10530, 11532,

Tire Size: 16 x 4.8

 

Inflation Pressure: 14 psi (,96 bar)

Spout Rotation

200 Degres

Impeller

12” (30cm) 4 Blade Ribbon Flighted Steel

Auger Opening Height

21” (53 cm)

Drive System

Friction Disc, 6 Forward Speeds, 2 Reverse

9.5 HP* Briggs & Stratton

Make

Briggs & Stratton

DIMENSIONS

 

Model

Intek Snow

 

Horsepower

9.5 @ 3600 rpm

Effective Clearing Width

Displacement

18.6 Cu. in (305 cc)

- 8526

26” (66cm)

Oil Capacity

28 oz. (,84 L)

- 9528

28” (71cm)

 

 

10.5 HP* Briggs & Stratton

- 10530

30” (76cm)

- 11532

32” (81cm)

Make

Briggs & Stratton

Length

 

Model

Intek Snow

 

Horsepower

10.5 @ 3600 rpm

- 8526

57.5” (146cm)

Displacement

18.6 Cu. in (305 cc)

- 9528

57.5” (146cm)

Oil Capacity

28 oz. (,84 L)

- 10530

57.5” (146cm)

 

 

- 11532

57.5” (146cm)

11.5 HP* Briggs & Stratton

Height

 

Make

Briggs & Stratton

 

- 8526

44.1” (112cm)

Model

Intek Snow

- 9528

44.1” (112cm)

Horsepower

11.5 @ 3600 rpm

- 10530

45” (114cm)

Displacement

18.6 Cu. in (305 cc)

- 11532

45” (114cm)

Oil Capacity

28 oz. (,84 L)

 

 

 

 

Weight

 

 

 

- 8526

248lbs. (112kg)

 

 

- 9528

255lbs. (116kg)

 

 

- 10530

255lbs. (116kg)

 

 

- 11532

260lbs. (118kg)

31

Image 34
Contents Print Vendor Instructions Operator’s ManualsPage OPERATOR’S Manual ModelsTable of Contents Safety Rules & Information Operating Safety Safety Rules and Information Moving PartsSafety Rules & Information TrainingSafety Rules ChildrenDecals DecalsNorth American Model Decals CE Model Decals ALL Model DecalsChute Release Shift Decal Safety Icons Safety IconsNorth American Identification NumbersCE Identification TAG Markings CE ModelsControl Locations Features, Controls, & OperationSpeed Selector Features & Controls Operation Checks Before Each START-UPElectric Start Starting ControlsManual Start Clearing a Clogged Discharge Chute Starting the EngineOperating the Snowthrower Will Continue until the Free-Hand Control is releasedDeflector Ground Speed SelectorEngine Speed Scraper BAR & Skid ShoesEasy Turn Traction Full TractionEasy Turn Freewheeling Traction Drive Lock After Each USE StorageChecking Tire Pressure Regular MaintenanceMaintenance Schedule Auger Gear Case LubricationRegular Maintenance LubricationCheck / Lubricate FREE-HAND Linkage Lubricating the Auger Shaft & AssemblyLubricate as shown in figure Page Troubleshooting, Adjustments, Service TroubleshootingThrown far enough Auger does not stop when augerAuger rotates, but snow is not Poor tractionTraction Drive Cable Adjustment AdjustmentsAuger Drive Adjustment Initial AdjustmentRun-In Adjustment 16 10.95cmAuger Drive Belt Easy Turn Cable AdjustmentBelt Adjustment Traction Drive BeltBelt Guide Adjustment Adjustments & ServiceShear PIN Replacement 3.18mm Service Belt ReplacementSpout Rotator Rod Special Nut Cover Hair Pin Traction Belt Change Swing Plate Alignment Tabs Engine SpecificationsChassis Maintenance Items Parts & AccessoriesReplacement Parts Technical ManualsO D U C T S