Simplicity E95288E, L9528EX, L11532E, L10530EX Starting Controls, Electric Start, Manual Start

			Operation
STARTING CONTROLS	G	F	B
See Figure 1 for the following instructions.			E
			A
Electric Start
A. Electric Start Button - The Electric Start Button			C
(A) activates an electric starter mounted to the	D
engine, eliminating the need to pull the starter han-
dle. The Electric Start Button operates on 120 Volts
AC, which is provided by connection to the extension
cord provided with units equipped with this feature.
Connect this extension cord ONLY to a properly
grounded 3 prong electrical outlet.	Intek
Manual Start	Model
B. Fuel Valve - (Intek Models) The fuel valve (B) is
located under the fuel tank. It is used to turn the fuel
supply off for out-of-season storage.			B
C. Starter Handle - The starter handle (C) connects to a		F
	G		A
starter cord to manually start the engine. Pulling
starter handle rapidly spins the engine crankshaft,
cycles the engine, and generates the spark neces-
sary for starting the engine.			C
D. Primer Button - When pressed, the primer button	D
(D) provides initial fuel to help start a cold engine.
Normally, pressing the primer button twice will pro-
vide enough fuel to start a cold engine.
E. Throttle Lever - (Intek Models)The throttle lever (E)	Power
controls the engine speed. For best overall perfor-	Built		H
mance, the throttle lever should be set to the FAST
position. Use the SLOW position only for warming the
engine, or to help prevent snow/ice freeze-up when
shutting the unit down for the day.

F. Engine Key - The engine key (F) prevents the	Figures 1. Engine Controls
	A. Electric Start Button
engine from being started by unauthorized individu-	B. Fuel Valve (Select Models)
als. The key must be fully inserted into the key slot	C. Starter Handle
for the unit to start. The key is also used to stop the	D. Primer Button
engine by pulling the key out of the key slot.	E. Throttle Lever (Intek Models Only)
G. Choke Knob - The choke knob (G) adjusts the	F. Engine Key
	G. Choke Knob
air/fuel mixture, and is used to help start a cold
	H. Stop Switch (Power Built Models)
engine by providing a richer mixture. Once the engine
is warm and running smoothly, the choke knob
should be set to the off position to provide a normal
air/fuel mix.

H.Stop Switch - (Power Built Models) Switch to the ON position to operate the engine. Switch to the OFF position to stop the engine.

13