Simplicity 7800085, 7800084, 7800138 Auger Drive Clutch Cable Adjustment, Drive Belt Adjustment

Page 25

Adjustments

AUGER DRIVE CLUTCH CABLE ADJUSTMENT

The auger drive clutch cable should be adjusted so that there is no slack in the cable when moved slightly from side to side. To adjust tension on the cable:

1.Loosen adjustment hex nut (Figure 21) by holding the adjusting flats and turning adjustment hex nut.

2.Tighten adjustment screw by turning adjustment flats and holding screw. The adjustment screw is a phillips screw and the head can be held or turned by inserting a screwdriver through the auger drive clutch cable spring. Tighten just until slack in cable is removed.

WARNING

Do not over-tighten, as this may lift the idler cable lever and cause auger drive to be engaged without depressing the Auger Control,

3.Tighten hex nut securely.

4.Start unit and check auger. Auger must not be engaged unless auger control is depressed.

5.With engine running, fully depress auger control, the auger should engage and run normally.

6.Release auger control. Auger must stop within 5 seconds.

7.If auger does not operate properly, stop engine and recheck clutch cable adjustments.

8.If clutch cable is properly adjusted, auger drive belt tension may require adjustment. See "Adjusting Auger Drive Belt" on next page.

DRIVE BELT ADJUSTMENT

The snowthrower is equipped with two drive belts locat- ed just in front of the engine under the belt cover. Figure 22 shows both belts and idler pulleys. The belt nearest the engine is the unit traction drive (wheels) belt. The belt farthest from the engine is the auger/impeller drive belt.

The traction drive belt has constant tension provided by a spring-loaded idler pulley arm, and is non-adjustable. This belt rotates whenever the engine is running, and provides power to the traction drive disc, which also rotates constantly while the engine is running.

The auger drive belt tension may be adjusted by moving the auger drive idler pulley. See "Adjusting Auger Drive Belt" on next page.

Auger Drive

Clutch Cable

Adjustment

Flats

Adjustment

Hex Nut

Adjustment

Screw

Auger Drive

Clutch Cable

Spring

Idler Rod

Right Handle

Figure 21. Auger Drive Clutch Cable Adjustment

Engine Pulley

Engine Pulley_

Pulley

IdlerBelt

Auger

Traction

Drive Pulley

Front

Auger

Figure 22. Drive Belt Paths

24

Image 25
Contents Operators Tableof Contents Preparation TrainingOperation SERVICE, MAINTENANCE, and Storage Safety RulesEmissions Page North American / CE Models CE Models only CE Identification TAG MarkingsID Tag Location General SafetyDecalsNo RTH AM ER Ican Model Decals CE Model DecalsRefueling CFSafety Ir.nns& CnmnlianceSpecSALL Models Features,Controls,& OperationControl Locations Features& ControlsStarting Controls EngineControlsUnits with Optional Electric Start Manual StartGround Speed Controls CnntrnlsDeflector Controls Checks Before Each START-UP OperationBriggs Stratton Models Starting the EngineClearing a Clogged Discharge Chute Operating the SnowthrowerGround Speed Selector Scraper BAR & Skid Shoes DeflectorChute Deflector Skid Shoe NutsAfter Each USE FREE-WHEELING Traction Drive LockKlik-Pin Inner HoleChecking Tire Pressure Maintenance ScheduleCheck Auger Gear Case Lubrication Lubrication MaintenanceImportant Note DisengagingStnrage Lubricating the Auger Shaft AssemblyLubrication Check / Lubricate FREE-HAND Linkage StorageProblem TroubleshootingPossible Cause Remedy Engine starts hard or runs poorly Auger does not rotateProblem Possible Cause Remedy TroubleshootingSpeed Selector Pivot Adjustment AdjustmentsTraction Drive Clutch Cable Adjustment Initial AdjustmentChute Direction Control ROD Gear Adjustment Manual Discharge Chute Control Linkage AdjustmentPinion Gear Adjustment Mounting NutsDrive Belt Adjustment Auger Drive Clutch Cable AdjustmentDrive Pulley Front Auger Adjusting Auger Drive Belt Checking Auger Belt & Belt Guide AdjustmentsDrive Belt Replacement Adjustments& ServiceAdjusting Auger Belt Guide Traction Drive Belt ReplacementAuger Drive Pulley and Belt Stops Auger Drive Belt ReplacementRoller Chain Replacement ServiceShear PIN Replacement Keeper linkCE Compliance Specifications DimensionsEngine ChassisReplacement Parts ReplacementParts& AccessoriesMaintenance Items Technical ManualsMANUFACTURING, INC

7800087, 7800086, 7800138, 7800084, 7800085 specifications

Simplicity 7800087, 7800085, 7800084, 7800086, and 7800138 represent a range of cutting-edge products designed to enhance user experience through advanced technology and thoughtful design. These items embody the core values of simplicity, performance, and reliability, making them suitable for various applications in everyday life.

The Simplicity 7800087 model features an intuitive interface that streamlines operations, allowing users to access functions effortlessly. Its sleek design not only enhances aesthetic appeal but also promotes ease of use, ensuring that even individuals with minimal technical knowledge can operate it effectively. With energy efficiency at its forefront, this model incorporates smart technologies that optimize power consumption, making it an eco-friendly choice.

Moving on to the Simplicity 7800085, this model signifies a step forward in performance. Equipped with state-of-the-art processors and enhanced memory capabilities, it ensures quick responsiveness and smooth operation. Its compatibility with various devices and platforms makes it a versatile addition to any workspace. Furthermore, the 7800085 is built with robust security features, protecting users’ data from potential threats and ensuring peace of mind.

The Simplicity 7800084 takes user engagement to the next level. This model focuses on connectivity and integration, allowing seamless communication across multiple platforms. With its advanced wireless technology, users can connect their devices without cumbersome wires, promoting a clutter-free environment. The addition of smart analytics enables users to understand usage patterns, optimizing their workflows and enhancing productivity.

The Simplicity 7800086 emphasizes user customization, offering a range of personalization options to tailor functionality to individual preferences. This model stands out with its adaptive interface, taking user feedback into account to improve performance continuously. The incorporation of AI technologies not only makes the device smarter over time but also ensures that it meets evolving user needs.

Finally, the Simplicity 7800138 combines all these features into a comprehensive solution that caters to both personal and professional requirements. Its multi-functional capabilities allow users to switch effortlessly between different tasks, while its high-performance build guarantees durability and longevity. Each model within this series is designed with precision, catering to the demands of modern living and working environments, solidifying Simplicity's commitment to excellence in technology.