Snapper 1724089 Mount Remote Deflector Control, Mount Lift Assist Bracket Manual Lift Models Only

Initial Setup & Assembly

	E
D	A
C	B

Figure 21. Mount Control Bracket - Current Models

A. 1/4-20 x 7/8 Capscrews	D. 1/4-20 Nuts
B. 1/4 x 1-1/4 Flatwashers	E. Mounting Bracket
C. 1/4 Lockwashers

Mount Remote Deflector Control

1.Using the template included in the back of this manu- al, drill two 9/32” holes in the dashboard to mount the remote chute control. See MOUNTING REMOTE DEFLECTOR CONTROL in the back of this book.

2.Mount the mounting bracket (E, Figure 21) to the dashboard. Secure with two 1/4-20 x 7/8 capscrews (A), lockwashers (C), and large flat washers (B).

3.Install the remote deflector control handle (B, Figure 22) in the mounting bracket (C) and secure with a clevis pin (A) and hair pin clip (D).

Mount Lift Assist Bracket

(Manual Lift Models Only)

1.Mount the lift assist bracket (A, Figure 233) to the snowthrower. Slide the bracket back so that it engages the snowthrower housing. Secure using a 5/16-18 x 1 capscrew (B), large washer (C), lock- washer and nut (D).

A

B

C

D

Figure 22. Install Remote Deflector Control

A.Clevis Pin

B.Deflector Control Handle

C.Mounting Bracket

D.Hair Pin Clip

B

A

C

D

Figure 23. Install Lift Assist Bracket

A.Lift Assist Bracket

B.Capscrew, 5/16-18 x 1

C.Large Washer

D.Lockwasher & Nut

18