General Operating Instructions, Transporting

General

Operating Instructions

Checks Before Starting

1.Refer to the Maintenance & Adjustments sections of this manual and perform any needed service. Also, refer to the tractor Operator’s Manual and perform any required service.

2.Remove any objects from the work area which might interfere with plowing activity.

3.Adjust the skid shoes to desired height. See Skid Shoe Adjustment.

4.Make sure all hardware is present and secure.

Engine & Ground Speed Selection

Always run the engine at full throttle.

Set tractor speed to obtain the needed power to move material. Operate at a safe speed, depending on condi- tions, so that you have complete control of the tractor. Rear wheel weights and chains are recommended for slippery surfaces.

A weight box is recommended for additional traction.

Transporting

For maximum ground clearance, transport the blade to and from work areas fully raised and angled straight ahead.

Starting & Stopping

1.Start the tractor engine. Set engine throttle to full.

2.Raise the attachment lift and travel to the work site.

3.Set the angling control to the desired angle.

4.Lower the attachment lift and begin plowing.

5.Raise the plow before backing up.

6.To stop the tractor, set ground speed to neutral and set the parking brake. Before leaving the seat, stop the engine, set the parking brake, remove the key, and wait for all moving parts to stop.

WARNING

Perform the Safety System Interlock test found in your tractor Operator’s Manual. If tractor does not pass the test, do not operate the tractor. See your authorized dealer. Under no circumstances should you attempt to defeat the safety system.

Use caution when plowing a snow covered area. Snow can cover objects such as curbs, drop-offs, and other obstacles. Be familiar with the area you are plowing.

To prevent an explosion or fire, never store the tractor with fuel in the tank inside a building where an ignition source is present.

IMPORTANT NOTE

To prevent damage to the unit, always raise the dozer blade BEFORE turning or backing up.

DANGER

OPERATING ON SLOPES CAN BE DANGEROUS

Never operate on slopes greater than 17.6% (10°) which is a rise of 3-1/2 feet (106cm) vertically in 10 feet (607cm) horizontally.

Operate the unit at a slow ground speed when driving onto slope. Avoid using brakes to control ground speed.

When operating on slopes that are greater than 15 % (8.5°) but less than 17.6%, use additional wheel weights or counterweights.

In addition to counterweights, use extra caution when operating on slopes. Drive UP and DOWN the slope, never across the face, use caution when changing directions and DO NOT START OR STOP ON SLOPE.

For additional traction, tire chains and a weight box can be added. Maximum weight added to tractor should not exceed 35 lbs. per wheel and 100 additional lbs. in weight box.

1694147, 1723445-02 specifications

The Snapper 1723445-02,1694147 represents a notable advancement in the realm of outdoor power equipment, particularly in the domain of lawn care and maintenance. This specific model is primarily designed for efficient lawn mowing, boasting a combination of performance, durability, and ease of use that appeals to both residential users and professional landscapers alike.

One of the main features of the Snapper 1723445-02,1694147 is its robust engine. Equipped with a high-performance gasoline engine, this mower provides reliable power output that ensures efficient cutting even in tough conditions. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling breaks.

The cutting deck of the Snapper model is engineered for precision and versatility. With an adjustable cutting height, users can customize their mowing experience based on the grass type and desired length. This feature is particularly beneficial for maintaining healthy lawns, as it allows for optimal grass length that adapts seasonally.

Technologically, the Snapper 1723445-02,1694147 incorporates innovative features such as a self-propelled drive system. This system not only enhances maneuverability but also reduces the physical effort required by the user, making lawn care less strenuous. The mower is designed with a user-friendly control panel, empowering users to easily adjust settings and access various mowing functions.

Durability is a hallmark of the Snapper brand, and this model is no exception. Constructed from high-quality materials, including a sturdy steel deck, the mower is built to withstand the rigors of regular use. This durability ensures longevity and maintains performance, even in challenging outdoor environments.

Additionally, the Snapper 1723445-02,1694147 emphasizes ease of maintenance. Accessible components and a straightforward design make it easy for users to perform routine checks and repairs, ultimately leading to a more efficient mowing experience. The inclusion of safety features, such as blade brake mechanisms, enhances user confidence during operation.

In conclusion, the Snapper 1723445-02,1694147 stands out in the competitive landscape of lawn mowers due to its powerful engine, versatile cutting capabilities, advanced technology, and durability. These characteristics make it an excellent choice for anyone seeking reliable performance and ease of use in lawn care equipment.