Snapper 1723445-02, 1694147 manual Adjustments, Skid Shoe Adjustment, Spring Tension

Page 8

Adjustments

Skid Shoe Adjustment

Slotted holes are provided to permit adjustment of the shoe assemblies for raising and lowering the blade to various working heights (see Figure 3).

When cleaning snow from gravel or earth drives or walks, the shoe assemblies should be lowered fully to prevent blade contact with gravel or ground. When cleaning smooth hard surfaces like concrete, the shoe assemblies are normally placed fully up to allow the blade to scrape the surface.

To adjust the skid, raise the blade off the ground and block with a piece of wood. Loosen the bolts (B, Figure

3)and move the skid shoes (A) up or down to desired height. Tighten the bolts securely.

Figure 3.

A. Skid Shoes

B. Bolts

Spring Tension

See Figure 4. This snow plow/dozer blade is spring loaded so that when the blade strikes a solid object, the springs will allow the blade to release as shown, rather than cause damage. The blade will go back to its original position after object is cleared.

Figure 4. Dozer Blade “Released”

See Figure 5. To adjust spring tension hold rear nut (B) and loosen front nut (E). Tighten rear nut (B) to increase spring tension, or loosen to decrease tension.

For initial adjustment, tighten nut (B) on each eyebolt enough to expose about 3/4" (19mm) of thread. Tighten front nut (E) against rear nut (B) to lock adjustment in place.

Figure 5. Tension Springs

 

A. Eyebolt

D. Pivot Frame

B. Nut, 5/16

E. Nut, 5/16

C. Spring

 

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Snow Plow/Dozer Blade HitchTable of Contents Safety Rules Information General WarningsControl Functions Tractor ControlsBlade Angle Control Lever Hydraulic Attachment Lift LeverGeneral Operating Instructions Checks Before StartingEngine & Ground Speed Selection TransportingGeneral Operating Instructions StorageLubricate Dozer Blade MaintenanceSchedule For Normal Care Spring Tension AdjustmentsSkid Shoe Adjustment Adjustments Lift Rod AdjustmentInitial Setup Assembly Pivot HitchInitial Setup & Assembly Initial Setup & AssemblyInstall Pivot Hitch Install Dozer BladeInstall Lift Rod Lift Rod Assembly Rod Guide Push Bar Lift Arm Spring ClipInstall Angling Control Rod Downward Pressure LockRemoving & Attaching Dozer Blade Removal & InstallationRemoving & Attaching Hitch & Blade Lift Variations When Using Attachments Lift VariationsHydraulic Lift Models Manual Lift ModelsPage Hardware Identification & Torque Specifications

1694147, 1723445-02 specifications

The Snapper 1723445-02,1694147 represents a notable advancement in the realm of outdoor power equipment, particularly in the domain of lawn care and maintenance. This specific model is primarily designed for efficient lawn mowing, boasting a combination of performance, durability, and ease of use that appeals to both residential users and professional landscapers alike.

One of the main features of the Snapper 1723445-02,1694147 is its robust engine. Equipped with a high-performance gasoline engine, this mower provides reliable power output that ensures efficient cutting even in tough conditions. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling breaks.

The cutting deck of the Snapper model is engineered for precision and versatility. With an adjustable cutting height, users can customize their mowing experience based on the grass type and desired length. This feature is particularly beneficial for maintaining healthy lawns, as it allows for optimal grass length that adapts seasonally.

Technologically, the Snapper 1723445-02,1694147 incorporates innovative features such as a self-propelled drive system. This system not only enhances maneuverability but also reduces the physical effort required by the user, making lawn care less strenuous. The mower is designed with a user-friendly control panel, empowering users to easily adjust settings and access various mowing functions.

Durability is a hallmark of the Snapper brand, and this model is no exception. Constructed from high-quality materials, including a sturdy steel deck, the mower is built to withstand the rigors of regular use. This durability ensures longevity and maintains performance, even in challenging outdoor environments.

Additionally, the Snapper 1723445-02,1694147 emphasizes ease of maintenance. Accessible components and a straightforward design make it easy for users to perform routine checks and repairs, ultimately leading to a more efficient mowing experience. The inclusion of safety features, such as blade brake mechanisms, enhances user confidence during operation.

In conclusion, the Snapper 1723445-02,1694147 stands out in the competitive landscape of lawn mowers due to its powerful engine, versatile cutting capabilities, advanced technology, and durability. These characteristics make it an excellent choice for anyone seeking reliable performance and ease of use in lawn care equipment.
Top Page Image Contents