General Operating Instructions, Storage

Changing Angle of the Blade:

See Figure 1 for location of Controls.

NOTE: It is easier to change the angle of the blade with the attachment raised.

1.Raise the attachment lift.

2.Use an abrupt pushing/pulling motion to release the angling mechanism and move the blade left or right. Push the angling lever forward fully to lock the blade in the left position. Pull the lever fully back to lock the blade in the right position. Move the lever slowly over center to lock in the centered position.

Dozing Tips

•Determine the best dozing pattern before beginning.

•When land contour permits, it is best to travel in the longest direction to minimize turning.

•In very deep snow or gravel, it may be necessary to make the first pass with dozer blade partially raised, then repeat each pass with the blade lowered to clear the material left on the surface. Also, it may be nec- essary to clear less than the full width of the dozer blade or reduce ground speed.

•When dozing, push the dirt to the desired location, then drag the blade backwards for final leveling. Pack down the dirt or gravel by driving the tractor over the leveled area.

•Use any slight grade to your advantage, doze down- hill, and set the blade angle so that the plowed mater- ial is moving downhill as it leaves the blade.

General Operating Instructions

Snow Plowing Tips

•Determine the best snow removal pattern before beginning.

•Plan the pattern so that you avoid pushing snow onto cleared areas.

•When land contour permits, it is best to travel in long straight lines to minimize turning.

•In very deep or heavy snow, it may be necessary to make the first pass with dozer blade partially raised, then repeat each pass with the blade lowered to clear the material left on the surface. Also, it may be nec- essary to clear less than the full width of the dozer blade or reduce ground speed.

•Snow tends to freeze into solid banks when plowed off a driveway or other large area. Because of this you may want to plow snow several feet past the edge of the drive to allow space for future plowing to build up.

•If pushing snow past the edges of driveways or side- walks, be careful not to tear up the grass buried under snow next to the drive or sidewalk. Lift the blade several inches off the ground to avoid damag- ing the grass.

•Spinning tires with tire chains can leave unsightly marks or permanent damage to asphalt or concrete driveways or sidewalks. Avoid sudden stops or starts.

IMPORTANT NOTE

Refer to Tractor Operator’s Manual for important information concerning safely storing your tractor.

Daily Storage

1.Allow tractor engine to cool before storing in any enclosure.

2.After dozing or plowing jobs are completed, hose or brush down the blade to remove excess dirt.

3.Lightly oil all pivot points. Coat bare metal surfaces to prevent corrosion.

Storage

Off-Season Storage

1.Remove dozer blade and hitch from the tractor.

2.Use water pressure or a brush to thoroughly clean the dozer blade.

3.Paint, or lightly coat with oil, any area where paint has been worn or chipped away.

4.Lubricate the dozer blade.

5.Store the dozer blade and hitch in a dry place.

1694147, 1723445-02 specifications

The Snapper 1723445-02,1694147 represents a notable advancement in the realm of outdoor power equipment, particularly in the domain of lawn care and maintenance. This specific model is primarily designed for efficient lawn mowing, boasting a combination of performance, durability, and ease of use that appeals to both residential users and professional landscapers alike.

One of the main features of the Snapper 1723445-02,1694147 is its robust engine. Equipped with a high-performance gasoline engine, this mower provides reliable power output that ensures efficient cutting even in tough conditions. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling breaks.

The cutting deck of the Snapper model is engineered for precision and versatility. With an adjustable cutting height, users can customize their mowing experience based on the grass type and desired length. This feature is particularly beneficial for maintaining healthy lawns, as it allows for optimal grass length that adapts seasonally.

Technologically, the Snapper 1723445-02,1694147 incorporates innovative features such as a self-propelled drive system. This system not only enhances maneuverability but also reduces the physical effort required by the user, making lawn care less strenuous. The mower is designed with a user-friendly control panel, empowering users to easily adjust settings and access various mowing functions.

Durability is a hallmark of the Snapper brand, and this model is no exception. Constructed from high-quality materials, including a sturdy steel deck, the mower is built to withstand the rigors of regular use. This durability ensures longevity and maintains performance, even in challenging outdoor environments.

Additionally, the Snapper 1723445-02,1694147 emphasizes ease of maintenance. Accessible components and a straightforward design make it easy for users to perform routine checks and repairs, ultimately leading to a more efficient mowing experience. The inclusion of safety features, such as blade brake mechanisms, enhances user confidence during operation.

In conclusion, the Snapper 1723445-02,1694147 stands out in the competitive landscape of lawn mowers due to its powerful engine, versatile cutting capabilities, advanced technology, and durability. These characteristics make it an excellent choice for anyone seeking reliable performance and ease of use in lawn care equipment.