Snapper 1694147, 1723445-02 manual Install Angling Control Rod, Downward Pressure Lock

Page 13

Initial Setup & Assembly

Install Angling Control Rod

NOTE: If installing dozer blade on the unit equipped with a snowcab, the angling rod support (A, Figure 14) is not required.

1.Remove the front two ratchet fasteners from the right foot rest pad. Peel the foot rest pad back.

2.Remove and discard the taptite screw (F).

3.Mount the angling control rod support (A) to the bot- tom of the frame foot rest support (D). Secure using two 1/16-18 x 1 capscrews, washers, and nuts (C).

NOTE: The inside hole used with the inside capscrew (B) can be accessed through the gap between the foot rest

(E) and dashboard in front of the brake pedal.

4. Reinstall the foot rest pad.

3.Connect the lower angling rod (F, Figure 15) to the dozer release lever using a hair pin clip and washer

(G).

4.Insert the upper control rod (C) through the eyelet (B), and secure the eyelet to the support using a 1/4- 20 nylock nut (A).

NOTE: It may be necessary to leave the eyelet nut (A, Figure 24) loose to prevent binding.

5Secure the upper rod (C) to the lower rod (F) using two 5/16-18 x 1-1/4 capscrews (D), washers (qty. 4), lockwashers, and nuts (E). NOTE: Match offset to offset so the rods form a straight line.

Downward Pressure Lock

Install the down-pressure lock plate (hydraulic lift mod- els) or switch the lift bar from mowing position to dozer position. See page 14.

F

B

 

A

 

E

 

D

 

C

 

Figure 13. Control Rod Support

A.Support

B.Capscrew, 5/16-18 x 1

C.Washer & Nut

D.Footrest Support (Frame)

E.Foot Rest (Tunnel)

F.Original Taptite Screw (Discard)

D

C

 

B

 

 

 

 

 

E

A

 

 

 

F

 

 

 

 

G

 

 

Figure 14. Assemble Control Rods

A.1/4-20 Nylock Nut

B.Eyelet

C.Upper Control Rod

D.5/16-18 x 1-1/4 Capscrew

E.5/16 Washers, Lockwashers, & Nuts

F.Lower Control Rod

G.Hair Pin Clip & Washer

12

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Hitch Snow Plow/Dozer BladeTable of Contents General Warnings Safety Rules InformationTractor Controls Control FunctionsBlade Angle Control Lever Hydraulic Attachment Lift LeverChecks Before Starting General Operating InstructionsEngine & Ground Speed Selection TransportingStorage General Operating InstructionsSchedule For Normal Care MaintenanceLubricate Dozer Blade Skid Shoe Adjustment AdjustmentsSpring Tension Lift Rod Adjustment AdjustmentsPivot Hitch Initial Setup AssemblyInitial Setup & Assembly Initial Setup & AssemblyInstall Pivot Hitch Install Dozer BladeLift Rod Assembly Rod Guide Push Bar Lift Arm Spring Clip Install Lift RodDownward Pressure Lock Install Angling Control RodRemoving & Attaching Hitch & Blade Removal & InstallationRemoving & Attaching Dozer Blade Lift Variations Lift Variations When Using AttachmentsHydraulic Lift Models Manual Lift ModelsPage Hardware Identification & Torque Specifications

1694147, 1723445-02 specifications

The Snapper 1723445-02,1694147 represents a notable advancement in the realm of outdoor power equipment, particularly in the domain of lawn care and maintenance. This specific model is primarily designed for efficient lawn mowing, boasting a combination of performance, durability, and ease of use that appeals to both residential users and professional landscapers alike.

One of the main features of the Snapper 1723445-02,1694147 is its robust engine. Equipped with a high-performance gasoline engine, this mower provides reliable power output that ensures efficient cutting even in tough conditions. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling breaks.

The cutting deck of the Snapper model is engineered for precision and versatility. With an adjustable cutting height, users can customize their mowing experience based on the grass type and desired length. This feature is particularly beneficial for maintaining healthy lawns, as it allows for optimal grass length that adapts seasonally.

Technologically, the Snapper 1723445-02,1694147 incorporates innovative features such as a self-propelled drive system. This system not only enhances maneuverability but also reduces the physical effort required by the user, making lawn care less strenuous. The mower is designed with a user-friendly control panel, empowering users to easily adjust settings and access various mowing functions.

Durability is a hallmark of the Snapper brand, and this model is no exception. Constructed from high-quality materials, including a sturdy steel deck, the mower is built to withstand the rigors of regular use. This durability ensures longevity and maintains performance, even in challenging outdoor environments.

Additionally, the Snapper 1723445-02,1694147 emphasizes ease of maintenance. Accessible components and a straightforward design make it easy for users to perform routine checks and repairs, ultimately leading to a more efficient mowing experience. The inclusion of safety features, such as blade brake mechanisms, enhances user confidence during operation.

In conclusion, the Snapper 1723445-02,1694147 stands out in the competitive landscape of lawn mowers due to its powerful engine, versatile cutting capabilities, advanced technology, and durability. These characteristics make it an excellent choice for anyone seeking reliable performance and ease of use in lawn care equipment.
Top Page Image Contents