Snapper 1694147, 1723445-02 manual Adjustments, Lift Rod Adjustment

Page 9

Adjustments

Lift Rod Adjustment

In the fully raised position the blade should be 4”-5” off the ground. In the fully lowered position, the lift rod should compress the spring creating downward pressure on the blade.

LIFT HEIGHT ADJUSTMENT

1.Fully raise the attachment lift. The attachment should be approximately 4”-5” off the ground. If not, go to step 2.

2.Lower the attachment and adjust the front set collar (A, Figure 6) to achieve the correct lift height.

DOWNWARD PRESSURE ADJUSTMENT

1.Place the lift in the fully raised position.

2.Slide the spring (C, Figure 6) forward so it is against the front set collar (A). Slide the rear set collar (D) up against the back of the spring. Use the rear set collar to compress the spring slightly, then tighten the set screw.

D

C

B

A

E

Figure 6. Adjusting Lift Rod

A.Front Set Collar

B.Rod Guide

C.Spring

D.Rear Set Collar

E.Spring Clip

IMPORTANT NOTE

DO NOT OVER-COMPRESS THE SPRING. In addition to providing downward pressure, the spring is an elastic medium that absorbs shocks caused by bumps and cracks in ground surfaces. Over-compressing the spring defeats this and may cause damage to the unit.

8

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hitch Snow Plow/Dozer BladeTable of Contents General Warnings Safety Rules InformationTractor Controls Control FunctionsBlade Angle Control Lever Hydraulic Attachment Lift LeverChecks Before Starting General Operating InstructionsEngine & Ground Speed Selection TransportingStorage General Operating InstructionsMaintenance Schedule For Normal CareLubricate Dozer Blade Adjustments Skid Shoe AdjustmentSpring Tension Lift Rod Adjustment AdjustmentsPivot Hitch Initial Setup AssemblyInitial Setup & Assembly Initial Setup & AssemblyInstall Pivot Hitch Install Dozer BladeLift Rod Assembly Rod Guide Push Bar Lift Arm Spring Clip Install Lift RodDownward Pressure Lock Install Angling Control RodRemoval & Installation Removing & Attaching Hitch & BladeRemoving & Attaching Dozer Blade Lift Variations Lift Variations When Using AttachmentsHydraulic Lift Models Manual Lift ModelsPage Hardware Identification & Torque Specifications

1694147, 1723445-02 specifications

The Snapper 1723445-02,1694147 represents a notable advancement in the realm of outdoor power equipment, particularly in the domain of lawn care and maintenance. This specific model is primarily designed for efficient lawn mowing, boasting a combination of performance, durability, and ease of use that appeals to both residential users and professional landscapers alike.

One of the main features of the Snapper 1723445-02,1694147 is its robust engine. Equipped with a high-performance gasoline engine, this mower provides reliable power output that ensures efficient cutting even in tough conditions. The engine's design emphasizes fuel efficiency, allowing users to cover larger areas without frequent refueling breaks.

The cutting deck of the Snapper model is engineered for precision and versatility. With an adjustable cutting height, users can customize their mowing experience based on the grass type and desired length. This feature is particularly beneficial for maintaining healthy lawns, as it allows for optimal grass length that adapts seasonally.

Technologically, the Snapper 1723445-02,1694147 incorporates innovative features such as a self-propelled drive system. This system not only enhances maneuverability but also reduces the physical effort required by the user, making lawn care less strenuous. The mower is designed with a user-friendly control panel, empowering users to easily adjust settings and access various mowing functions.

Durability is a hallmark of the Snapper brand, and this model is no exception. Constructed from high-quality materials, including a sturdy steel deck, the mower is built to withstand the rigors of regular use. This durability ensures longevity and maintains performance, even in challenging outdoor environments.

Additionally, the Snapper 1723445-02,1694147 emphasizes ease of maintenance. Accessible components and a straightforward design make it easy for users to perform routine checks and repairs, ultimately leading to a more efficient mowing experience. The inclusion of safety features, such as blade brake mechanisms, enhances user confidence during operation.

In conclusion, the Snapper 1723445-02,1694147 stands out in the competitive landscape of lawn mowers due to its powerful engine, versatile cutting capabilities, advanced technology, and durability. These characteristics make it an excellent choice for anyone seeking reliable performance and ease of use in lawn care equipment.
Top Page Image Contents