Snapper 8526, 9528, 10530, 11532 manual Features, Controls, & Operation, Control Locations

Page 11

Features, Controls, & Operation

Please take a moment and familiarize yourself with the name, location, and function of these controls so that you will better understand the safety and operating instructions provided in this manual.

CONTROL LOCATIONS

The information below briefly describes the function of individual controls. Starting, stopping, and driving require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section.

Speed Selector		Traction Control / Free Hand™ Lock

Selects forward speeds 1-6 and reverse speeds 1-2. No neutral position or gate is required, since the traction drive design automatically provides "neutral" (no forward or reverse movement), whenever the Drive Control is released.

Engages traction drive to wheels when depressed. Also locks auger control when depressed simultaneously. Releasing the traction control lever releases the Free Hand™ auger control lock and stops the drive wheels and auger.

10

Image 11

Contents Models OPERATOR’S ManualTable of Contents Safety Rules & Information Operating Safety Moving Parts Safety Rules and InformationTraining Safety Rules & InformationChildren Safety RulesNorth American Model Decals DecalsDecals Chute Release Shift Decal ALL Model DecalsCE Model Decals Safety Icons Safety IconsCE Models Identification NumbersCE Identification TAG Markings North AmericanSpeed Selector Features, Controls, & OperationControl Locations Features & Controls Checks Before Each START-UP OperationManual Start Starting ControlsElectric Start Will Continue until the Free-Hand Control is released Starting the EngineOperating the Snowthrower Clearing a Clogged Discharge ChuteScraper BAR & Skid Shoes Ground Speed SelectorEngine Speed DeflectorEasy Turn Freewheeling Traction Drive Lock Full TractionEasy Turn Traction Storage After Each USEAuger Gear Case Lubrication Regular MaintenanceMaintenance Schedule Checking Tire PressureLubrication Regular MaintenanceLubricate as shown in figure Lubricating the Auger Shaft & AssemblyCheck / Lubricate FREE-HAND Linkage Page Troubleshooting Troubleshooting, Adjustments, ServicePoor traction Auger does not stop when augerAuger rotates, but snow is not Thrown far enoughInitial Adjustment AdjustmentsAuger Drive Adjustment Traction Drive Cable Adjustment16 10.95cm Run-In AdjustmentTraction Drive Belt Easy Turn Cable AdjustmentBelt Adjustment Auger Drive Belt3.18mm Adjustments & ServiceShear PIN Replacement Belt Guide AdjustmentBelt Replacement ServiceSpout Rotator Rod Special Nut Cover Hair Pin Traction Belt Change Swing Plate Alignment Tabs Chassis SpecificationsEngine Technical Manuals Parts & AccessoriesReplacement Parts Maintenance ItemsO D U C T S