|
|
| Operation | |
STARTING CONTROLS | G | F | B | |
See Figure 1 for the following instructions. |
|
| E | |
|
| A | ||
Electric Start |
|
| ||
|
|
| ||
A. Electric Start Button - The Electric Start Button |
|
| C | |
|
|
| ||
(A) activates an electric starter mounted to the | D |
|
| |
engine, eliminating the need to pull the starter han- |
|
| ||
dle. The Electric Start Button operates on 120 Volts |
|
|
| |
AC, which is provided by connection to the extension |
|
|
| |
cord provided with units equipped with this feature. |
|
|
| |
Connect this extension cord ONLY to a properly |
|
|
| |
grounded 3 prong electrical outlet. | Intek |
|
| |
Manual Start | Model |
|
| |
|
|
| ||
B. Fuel Valve - (Intek Models) The fuel valve (B) is |
|
|
| |
located under the fuel tank. It is used to turn the fuel |
|
|
| |
supply off for |
|
| B | |
C. Starter Handle - The starter handle (C) connects to a |
| F | ||
G | A | |||
starter cord to manually start the engine. Pulling |
| |||
starter handle rapidly spins the engine crankshaft, |
|
|
| |
cycles the engine, and generates the spark neces- |
|
|
| |
sary for starting the engine. |
|
| C | |
D. Primer Button - When pressed, the primer button | D |
|
| |
(D) provides initial fuel to help start a cold engine. |
|
|
| |
Normally, pressing the primer button twice will pro- |
|
|
| |
vide enough fuel to start a cold engine. |
|
|
| |
E. Throttle Lever - (Intek Models)The throttle lever (E) | Power |
|
| |
controls the engine speed. For best overall perfor- | Built |
| H | |
|
| |||
mance, the throttle lever should be set to the FAST |
|
| ||
|
|
| ||
position. Use the SLOW position only for warming the |
|
|
| |
engine, or to help prevent snow/ice |
|
|
| |
shutting the unit down for the day. |
|
|
|
F. Engine Key - The engine key (F) prevents the | Figures 1. Engine Controls | |
A. Electric Start Button | ||
engine from being started by unauthorized individu- | B. Fuel Valve (Select Models) | |
als. The key must be fully inserted into the key slot | C. Starter Handle | |
for the unit to start. The key is also used to stop the | D. Primer Button | |
engine by pulling the key out of the key slot. | E. Throttle Lever (Intek Models Only) | |
G. Choke Knob - The choke knob (G) adjusts the | F. Engine Key | |
G. Choke Knob | ||
air/fuel mixture, and is used to help start a cold | ||
H. Stop Switch (Power Built Models) | ||
engine by providing a richer mixture. Once the engine | ||
| ||
is warm and running smoothly, the choke knob |
| |
should be set to the off position to provide a normal |
| |
air/fuel mix. |
|
H.Stop Switch - (Power Built Models) Switch to the ON position to operate the engine. Switch to the OFF position to stop the engine.
13