Snapper 8526, 9528, 10530, 11532 manual Specifications, Engine, Chassis

Specifications

NOTE: Specifications are correct at time of printing and are subject to change without notice.

* Power Ratings

The power ratings for an individual engine model are initially developed by starting with SAE (Society of Automotive Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) (Revision 2002–05). Given both the wide array of products on which our engines are placed, and the variety of environmental issues applicable to operating the equipment, it may be that the engine you have purchased will not develop the rated horsepower when used in a piece of power equipment (actual “on–site” power). This difference is due to a variety of factors including, but not lim- ited to, the following: differences in altitude, temperature, barometric pressure, humidity, fuel, engine lubrication, max-

imum governed engine speed, individual engine to engine variability, design of the particular piece of power equip- ment, the manner in which the engine is operated, engine run–in to reduce friction and clean out of combustion chambers, adjustments to the valves and carburetor, and other factors. The power ratings may also be adjusted based on comparisons to other similar engines utilized in similar applications, and will therefore not necessarily match the values derived using the foregoing codes.

ENGINE:

8.5 HP* Briggs & Stratton

Make	Briggs & Stratton
Model	Power Built
Horsepower	8.5 @ 3600 rpm
Displacement	15.2 Cu. in (249 cc)
Oil Capacity	19 oz. (,56 L)

CHASSIS:

Wheels
- 8526, 9528,	Tire Size: 15 x 5
	Inflation Pressure: 20 psi (1,37 bar)
- 10530, 11532,	Tire Size: 16 x 4.8
	Inflation Pressure: 14 psi (,96 bar)
Spout Rotation	200 Degres
Impeller	12” (30cm) 4 Blade Ribbon Flighted Steel
Auger Opening Height	21” (53 cm)
Drive System	Friction Disc, 6 Forward Speeds, 2 Reverse

9.5 HP* Briggs & Stratton

Make	Briggs & Stratton	DIMENSIONS
Model	Intek Snow
Horsepower	9.5 @ 3600 rpm	Effective Clearing Width
Displacement	18.6 Cu. in (305 cc)
		- 8526	26” (66cm)
Oil Capacity	28 oz. (,84 L)
		- 9528	28” (71cm)
10.5 HP* Briggs & Stratton		- 10530	30” (76cm)
		- 11532	32” (81cm)
Make	Briggs & Stratton	Length
Model	Intek Snow
Horsepower	10.5 @ 3600 rpm	- 8526	57.5” (146cm)
Displacement	18.6 Cu. in (305 cc)	- 9528	57.5” (146cm)
Oil Capacity	28 oz. (,84 L)	- 10530	57.5” (146cm)
		- 11532	57.5” (146cm)
11.5 HP* Briggs & Stratton		Height
Make	Briggs & Stratton
		- 8526	44.1” (112cm)
Model	Intek Snow
		- 9528	44.1” (112cm)
Horsepower	11.5 @ 3600 rpm
		- 10530	45” (114cm)
Displacement	18.6 Cu. in (305 cc)
		- 11532	45” (114cm)
Oil Capacity	28 oz. (,84 L)
		Weight
		- 8526	248lbs. (112kg)
		- 9528	255lbs. (116kg)
		- 10530	255lbs. (116kg)
		- 11532	260lbs. (118kg)

31