Snapper 8526, 9528, 10530, 11532 manual Safety Icons

Page 9

Safety Icons

SAFETY ICONS

WARNING: READ OPERATOR’S MANUAL.

Read and understand the Operator’s Manual before using this machine.

DANGER: THROWN OBJECTS.

This machine is capable of throwing objects and debris. Keep bystanders away.

WARNING: REMOVE KEY BEFORE SERVICING.

Remove the key, disconnect spark plug wire, and consult technical litera- ture before performing repairs or maintenance.

WARNING: DISMEMBERMENT.

This machine can amputate limbs. Keep bystanders and children away when engine is running.

DANGER: DISMEMBERMENT.

The auger can amputate limbs. Keep hands and feet away from auger and rotating parts.

DANGER: DISMEMBERMENT.

The impeller can amputate limbs. Stop the engine, remove the key, and disconnect spark plug wire before clearing the discharge chute or per- forming service work. Keep hands and feet away from impeller and rotat- ing parts.

Image 9

Contents Models OPERATOR’S ManualTable of Contents Safety Rules & Information Operating Safety Moving Parts Safety Rules and InformationTraining Safety Rules & InformationChildren Safety RulesDecals DecalsNorth American Model Decals ALL Model Decals CE Model DecalsChute Release Shift Decal Safety Icons Safety IconsCE Identification TAG Markings Identification NumbersNorth American CE ModelsFeatures, Controls, & Operation Control LocationsSpeed Selector Features & Controls Checks Before Each START-UP OperationStarting Controls Electric StartManual Start Operating the Snowthrower Starting the EngineClearing a Clogged Discharge Chute Will Continue until the Free-Hand Control is releasedEngine Speed Ground Speed SelectorDeflector Scraper BAR & Skid ShoesFull Traction Easy Turn TractionEasy Turn Freewheeling Traction Drive Lock Storage After Each USEMaintenance Schedule Regular MaintenanceChecking Tire Pressure Auger Gear Case LubricationLubrication Regular MaintenanceLubricating the Auger Shaft & Assembly Check / Lubricate FREE-HAND LinkageLubricate as shown in figure Page Troubleshooting Troubleshooting, Adjustments, ServiceAuger rotates, but snow is not Auger does not stop when augerThrown far enough Poor tractionAuger Drive Adjustment AdjustmentsTraction Drive Cable Adjustment Initial Adjustment16 10.95cm Run-In AdjustmentBelt Adjustment Easy Turn Cable AdjustmentAuger Drive Belt Traction Drive BeltShear PIN Replacement Adjustments & ServiceBelt Guide Adjustment 3.18mmBelt Replacement ServiceSpout Rotator Rod Special Nut Cover Hair Pin Traction Belt Change Swing Plate Alignment Tabs Specifications EngineChassis Replacement Parts Parts & AccessoriesMaintenance Items Technical ManualsO D U C T S