Snapper L1226EX, L1428EX, L11226EX, L1530EX manual Traction Belt Change Swing Plate Alignment Tabs

Page 33

S e r v i c e

Traction Drive Belt

If the snow thrower will not move forward, check the trac- tion drive belt for wear or damage. If the traction drive belt is worn or damaged, replace the belt as follows.

1.Disconnect the spark plug wire.

2.Remove the auger drive belt. See “How To Remove The Auger Drive Belt” in the Service section.

3.Remove the e-ring (J, Figure 29) from one end of the swing plate axle rod (I).

4.Remove the swing plate axle rod (I) to allow the swing plate (A, Figure 33) to pivot forward.

5.Remove the traction drive spring (E, Figure 29).

6.Remove the old traction drive belt (A) from the trac- tion drive pulley (G) and from the traction drive pulley

(F). Replace the traction drive belt (A) with an origi- nal factory replacement belt available from an autho- rized dealer.

7.Install the new traction drive belt (A) onto the traction drive pulley (G) and onto traction drive pulley (F).

8.Make sure the traction drive idler pulley (L) is proper- ly aligned with the traction drive belt (A).

9.Attach the traction drive spring (E).

10.Install the swing plate axle rod (I) and secure with the e-ring (J) removed earlier.

11.The bottom of the swing plate (A, Figure 33) must be positioned between the alignment tabs (B). Make sure the swing plate is properly secured.

NOTE: If the drive will not engage after the traction drive belt has been replaced, then check to make sure that the swing plate is positioned between the alignment tabs.

12.Install and adjust the auger drive belt. See “Belt Replacement” in this section of the manual.

13.Adjust the belt guide. See “Belt Adjustment” in this section of the manual.

14.Install the bottom panel (B, Figure 28).

15.Tighten the capscrews (A) on each side of the bottom panel (B).

16.Reinstall belt cover (A, Figure 24) and secure with screws (B).

17.Check the adjustment of the cables. See “Cable Adjustment” in this section of the manual.

18.Connect the spark plug wire.

A

B

Figure 33. Traction Belt Change

A.Swing Plate

B.Alignment Tabs

32

Image 33
Contents Models OPERATOR’S ManualTable of Contents Safety Rules & Information Operating Safety Moving Parts Safety Rules & InformationTraining Ignition System C a l s DecalsNorth American Model Decals ALL Model Decals CE Model DecalsChute Release Shift Decal Safety Icons Safety IconsCE Identification TAG Markings Id entification NumbersNorth American CE ModelsControl Locations Features, Controls, & OperationFeatures & Controls Checks Before Each START-UP E r a t i o nElectric Start Starting ControlsManual Start Snow Series MaxStarting the Engine Stopping the Engine E r a t i o nOperating the Snowthrower Clearing a Clogged Discharge ChuteWill Continue until the Free-Hand Control is released Engine Speed Ground Speed SelectorDeflector Scraper BAR & Skid ShoesFull Traction Easy Turn TractionEasy Turn Freewheeling and Traction Drive Lock Storage After Each USEPage Maintenance Schedule Checking Tire PressureAuger Gear Case Lubrication Lubrication Regular MaintenanceLubricate Auger Shaft Assembly Check / Lubricate FREE-HAND LinkageLubricate as shown in Figure Problem Possible Cause Remedy TroubleshootingAuger rotates, but snow is not When drive lever is releasedThrown far enough Poor tractionTraction Drive Cable Adjustment Auger Drive AdjustmentInitial Adjustment J u s t m e n t sAdjustments Run-In Adjustment16 10.95cm Belt Adjustment Easy Turn Cable AdjustmentAuger Drive Belt Traction Drive BeltShear PIN Replacement Adjustments & ServiceBelt Guide Adjustment 3.18 mmR v i c e Belt ReplacementSpout Rotator Rod Special Nut Cover Hair Pin Traction Belt Change Swing Plate Alignment Tabs Engine DimensionsChassis Series Briggs & StrattonReplacement Parts Maintenance ItemsTechnical Manuals O D U C T S

L1428EX, L1226EX, L1632E, L1530EX, 1632EX specifications

The Snapper L series of lawn mowers, including models L11226EX, L1428E, L1530E, 1632E, and 1632EX, represent a perfect blend of innovation, efficiency, and durability for both residential and commercial applications. Each model comes equipped with unique features and cutting-edge technologies designed to enhance user experience and improve lawn care results.

Starting with the L11226EX, this model features a powerful engine that ensures optimal performance while cutting through grass with precision. It boasts a 26-inch cutting deck, providing a wide cutting path for faster mowing sessions. The inclusion of an adjustable height feature allows users to easily customize the mowing height to achieve their desired lawn finish. Another key feature is its easy-to-use self-propulsion system, which makes navigating uneven terrain a breeze.

The L1428E model is notable for its eco-friendly electric engine, reducing emissions while maintaining a quiet operation. It features a compact 28-inch deck, making it perfect for maneuvering through tight spaces and small yards. The ergonomic design enhances comfort and control, making longer mowing sessions less tiring. Additionally, it includes a rapid charge system, ensuring minimal downtime between uses.

Moving on to the L1530E, this model capitalizes on an efficient battery technology that delivers consistent power. Equipped with a 30-inch deck, it strikes a balance between maneuverability and coverage. The model's innovative grass collection system ensures minimal clumping, providing a neat finish. Moreover, its lightweight design allows for easy handling and transport.

The 1632E model is designed for those looking for robust performance coupled with advanced technology. With a 32-inch cutting deck, it excels in larger properties while maintaining excellent cutting quality. Its dual-blade system provides a clean cut and promotes healthy grass growth. The mower's user-friendly dashboard features intuitive controls, allowing operators to switch between modes efficiently.

Lastly, the 1632EX variant comes with enhanced features, including an intuitive smart-cut technology that intelligently adjusts the mower's speed based on grass thickness. This ensures optimal energy consumption while achieving superior cutting results. This model also includes a sturdy build that withstands tough conditions, along with oversized rear wheels for increased stability and traction.

Overall, each of these Snapper L series mowers is engineered with performance, comfort, and eco-responsibility in mind, making them excellent choices for any lawn care enthusiast. Whether tackling small yards or large properties, these mowers deliver the reliability and efficiency required for superior lawn maintenance.