SNOW THROWER COMPONENTS
Please familiarize yourself with the locations and functions of the various components and controls of the snow thrower.
2
3
4
\
5
\
7 (internal)
t0
(1)Drive Control- Drives the snow thrower at the
(2)Handle- Hold the snow thrower here when using.
(3)Auger Control- Rotates the auger when
depressed.
(4)Drive Speed Control- Sets the speed and
direction of the snow thrower.
(5)Chute Rotation Handle- Use to adjust throwing direction of snow exhausted from the chute.
(6)Wheel Traction Drive Lock- Pin that locks the wheel into the automatic drive system.
(7)Impeller- Spinniug mechanisln that works to propel snow out the chute.
(8)Auger Shield- A shroud that covers the auger. This is the intake point for the snow.
(9)Adjustable Skid Shoes- Control the height of the auger and auger shield from the ground.
(10)Auger- Spinning mechanism that intakes snow into the snow thrower.
(11)Chute- Exit shaft of shoveled snow.
(12)Engine- Provides power to the snow thrower (see engine components on next page).